bobjs 28 Posted December 17, 2009 Report Share Posted December 17, 2009 (edited) I have only just got this and i have to sell it on as its just a tad to heavy for me and my bad back. its a .22 calibre Centre fire moderator. so will be ok for .22 hornet, 204. .223.etc, anodised black. http://img192.imageshack.us/img192/2151/myrifles.jpg its the one on my .20 tac at the bottom of the pile. centre bore is 6mm fully stripable and will fit a barrel with a outer diameter thickness of 22mm. it is fitted with a rear bush/O ring to aid in the prevention of marking the bluing of the rifle barrel. the thread is that of 5/8th 18tpi. this is a top spec and built like a tank moderator. i have only put 50 rounds from my .20tac through it so as new. a few small marks as I'm a hunter/user of my rifles not just a owner/shinner of all things shooting related. pictures to follow. and is just £110 cash shipped recorded delivery. thank you bob. here are some picturs of the moderator. 1, http://img51.imageshack.us/img51/4311/p1010001q.jpg 2, http://img51.imageshack.us/img51/5859/p1010002zh.jpg'>http://img51.imageshack.us/img51/5859/p1010002zh.jpg 3, http://img51.imageshack.us/img51/5859/p1010002zh.jpg 4, http://img259.imageshack.us/img259/7603/p1010004.jpg 5, http://img51.imageshack.us/img51/1885/p1010005z.jpg thank you bob. Edited December 17, 2009 by scotland rifles Link to post Share on other sites
manmc5 0 Posted February 16, 2010 Report Share Posted February 16, 2010 i have a cz .222 rifle ,would it fit this rifle and would you post to ireland Link to post Share on other sites
Recommended Posts