petehu7 0 Posted June 11, 2009 Report Share Posted June 11, 2009 Hi my HW90 is a little short of wind it’s putting out around 10.2 fp. If you have a suitable pump I would be grateful if you could pump a little more life into my 90. Regards in anticipation Pete Quote Link to post
smokin 0 Posted June 12, 2009 Report Share Posted June 12, 2009 IF you can get the right connecting hose you can do it VERY carefully off a divers bottle like filling a pcp - its around the 50BAR mark - do not go over this - A - you wont be able to cock the rifle . B - the ram seals will 'burn' out VERY quickly thats how ive done it in the past on theos and a '90k - borrowed the hose though maybe someone like your local PIRTEK outlet could make a hose up if youve got access to a dives bottle an gauge the dedicated theoben pumps and hose aint cheap if i recall correctly - just found em here - £22 for the hose / £75 all in when i did it you pump it up, then tap the valve with a suitable tool - i used an allen key - to reduce the pressure to the right value - its just a heavy duty schraeder valve hth chris Quote Link to post
petehu7 0 Posted June 12, 2009 Author Report Share Posted June 12, 2009 Thanks for the reply Chris I don’t think I’ll risk the divers bottle method with my luck. Pete Quote Link to post
smokin 0 Posted June 12, 2009 Report Share Posted June 12, 2009 Thanks for the reply Chris I don't think I'll risk the divers bottle method with my luck. Pete stirrup pump then - its not as hard as you think!! - local gunshop should have the gear if its just a top up - £5 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.