RaiderBoy 19 Posted May 14, 2009 Report Share Posted May 14, 2009 as i said above i went to pump up my gun this morning and i managed tyo get to about 100 bar and it became really easy to pump and the preassure did not go up any more. the seals on the filling probe have been changed but it still does it and there is no hissing fromk the pump. also if it helps when i leave the pump standing up the handle part rises slowly Quote Link to post
Guest Scuba1 Posted May 14, 2009 Report Share Posted May 14, 2009 Its the seat or the seals in the none return valve of your pump. HTH Michael Quote Link to post
RaiderBoy 19 Posted May 14, 2009 Author Report Share Posted May 14, 2009 Its the seat or the seals in the none return valve of your pump. HTH Michael any ideas how much that is going to cost and were i can get it done ? Quote Link to post
Guest Scuba1 Posted May 14, 2009 Report Share Posted May 14, 2009 I would try to get the spares from the company that made your pump or ask at the LFD where you got it. Not a clue about cost though but can't be all that expensive. somewhere within the 20 quid I would guess. ATB Michael Quote Link to post
RaiderBoy 19 Posted May 14, 2009 Author Report Share Posted May 14, 2009 cheers for the advice scuba 1 im going to have find another gunshop to go to because the one that the pump was purchased from tried to charge me 17 quid for the o rings that go around the filling probe Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.