Jump to content

sumo

Members
  • Content Count

    16
  • Joined

  • Last visited

Posts posted by sumo

  1. The easiest way i know to straighten wire is the way the ceiling fixers do which is

    before you cut it to size fasten one end to a fence post or somthing simular unroll

    about 20 yards then fasten it to a old drill electric or battery pull it tight and give

    it about 30/40 revs make sure you keep plenty of tension on the wire

    then let the drill back wind between 5 to 10 revs then cut it of the drill

    PLEASE be carefull as it might still spin back a little when you cut it

    you should have a length of straight wire ready to be cut into what ever length

    you want

    atb stu

  2. I`ve tryed a few rifles with gas rams in and i would`nt thank you for one

    give tony a call at sandwell field sports 0121 5202000 he will do you a spring

    and seal for a lot less than a gas ram will cost and his springs are very good

    cheers stu

  3. Hi saxo try this set your parallax for about 35yds set your mag at your hunting mag

    [mine is 8 mag ] sit down and refocus the eye bell till you can see clearly and re zero

    if you use a high mag [12 or higher ] this won`t work

    i done this on my hawk pro stalk on the rimmy and i can see fine from 15 yds to over

    100 yds with out adjusting the scope

    give it a try before you change the scope it might work on yours hawk make some good

    scopes

    atb stu :)

  4. Hi cometa a light weight pellet will allways produce more power in a springer

    than in a precharge

    yet a heavy pellet will allways produce more power out of a precharge than a

    spring gun I don`t know why this is it just is

    aa diablo should give you about the right power to weight ratio in your gun

    in 177 in 22 i would go for a light weight pellet such as a bisley lrg or accupell

    hope this helps

    cheers stu

    [forgive my ramberling im a bit p**s*d ]

×
×
  • Create New...