IT'S HOME

[bigmac 97kt 13,732]

Well si came to mine the other day 

And dropped off the verminator mk2 177

He has had to much work on and could not find the time to sort it out for me, 

It was nice to see him it's been a while since I last saw him 

Any way we arranged for me to go to his for a week ends shooting 

So I tried to sort it out my self and failed miserably lol

Frustrated I called Sean (vislauk) 

After a few phone calls he sayd bring it over I took it to the rfds to get it crono, d and it was doing 315 fps

1,77fb 

I should explain at this point 

The rifle developed bottle wobble and when you tighten the bolt up that locks the bottle in place the power drops off a lot 

And the cocking arm becomes notchey and some times would not push forward at all 

BUT if you slackened the bolt off the power came back and it was smooth to cock again but the wobble comes back 

It had my head battered I can tell you 

Any way Sean stripped it down but with the verminator it's not just Lossen the stock and take it off 

You have to first slacken the trigger blade then screw off the air bottle 

Then remove the front air chamber then unscrew the screw and remove 

The stock, 

Now Sean took every thing off the action took the spring out and had a good look at every thing and put every thing back together and tightened every thing back up 

Tight real tight result 

Spot on no wobble power is just under 12 and so so smooth to cock 

Highest it was before was 737fps

9 something fb

I'm so so happy this is sorted It's one of my favs is this fx verminator mk2 in 177 flavour

Thanks Sean so much mate 

Atvbjimmy

Ps and si brought my pard 008 back to 

Just hope it don't feck with my head again lol

[vizlauk 1,568]

Done & dusted in less than 10 minutes,  I was surprised it was doing 1.77 lb ft with a 7.33g pellet when tighterned,  and low 9lb ft when the bolt was loose, very similar action to my old fx streamline,  so its easy when you know what your doing

And your welcome Jimmy. 

[bigmac 97kt 13,732]

1 hour ago, vizlauk said:

Done & dusted in less than 10 minutes,  I was surprised it was doing 1.77 lb ft with a 7.33g pellet when tighterned,  and low 9lb ft when the bolt was loose, very similar action to my old fx streamline,  so its easy when you know what your doing

And your welcome Jimmy. 

Over the moon Sean honest mate 

It's like having a new rifle lol

Atvbjimmy

[philpot 4,927]

I am so pleased you got your baby back Jimmy. 

I know our Si has been well under the cosh with work and his shoulder issues otherwise he would have had it sorted for you mate but at least you have it now.

Phil

[JayB0 121]

22 hours ago, philpot said:

I am so pleased you got your baby back Jimmy. 

I know our Si has been well under the cosh with work and his shoulder issues otherwise he would have had it sorted for you mate but at least you have it now.

Phil

You watch, he won't touch another rifle now

[bigmac 97kt 13,732]

On 11/11/2021 at 08:11, JayB0 said:

You watch, he won't touch another rifle now

It was a hard decision yesterday morning 

Kral or Vermy took both out of there cases sat and looked at both 

And the only reason I took the Vermy was simple really 

I HAD NOT SHOT IT FOR A WHILE 

Or I'd of taken the kral 

So your wrong on that point JayB0

Atvbjimmy