Jump to content

New trap question


Recommended Posts


Don't know about mole traps but i was using FenMk6s first lot where  chained on the dog run for a fortnight to weather second lot used straight out the box and i don't think there was any difference in the catch rate .

  • Like 1
Link to post

  On my tunnels I bend the trigger forward a little and square the bottom off with pliers. on  the top theres a wire hook that I twist so it releases easier.. 

Also used them  new without a tweak and caught plenty times. once they catch and smell of mole I keep using the same traps..

  • Like 3
Link to post
3 hours ago, OldPhil said:

Let your new Mole Traps weather in a good killing run...?

All the best,..I wish you good trapping..?

Yep, depending on the design of trap you might or might not choose to fiddle with the triggers to adjust sensitivity.  

       But when it comes to weathering ,Old Phil is spot on; let em weather on the job.?

Edited by comanche
  • Like 1
Link to post

I found that the trigger latches on mine had a small lip caused by the way the wire had been cut. First thing I do is file the bottom of the latch so there is nothing to cause the trigger to hang when it is being pushed forward. Then I do what Smithie has said. If you don't bend the trigger loop you will get a lot of foul captures.

  • Like 2
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...