Jump to content

Recommended Posts


I recently bought a Lee Mould

It only makes 2 balls at a time , but the overall process is quicker compared to the fishing moulds

This is because you don’t have to do any cutting or removing bits off the ball

I decided on the Lee Mould because I noticed that there was an accuracy issue sometimes with the fishing mould balls compared to using steel ammo

The Lee Mould balls don’t have this problem 

The price of the Mould was about £25 from Henry Crank

Hope this helps ?

Edited by whipbed
  • Like 1
Link to post
Share on other sites

I got a 10mm one as I have found 9.5mm steel just a bit light for my type of shooting (I’m probably not a good enough shot ?)

I was using 12mm lead ammo but I wasn’t any good with that either due to drop off

The 10mm lead is not much bigger  physically than the 9.5mm steel but hopefully heavy enough to do the job

It doesn’t drop off as much as I thought it would at longer distances.

I will just have to try and hit something with them now !

 

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...