waltjnr 5,957 Posted September 13, 2019 Report Share Posted September 13, 2019 What do I need to charge my newly acquired HW100, my only pcp is a BSA S10, so just screw my buddy bottle into a block on top of my bottle, so guessing I need some sort of hose to connect? Quote Link to post
eddytom 286 Posted September 13, 2019 Report Share Posted September 13, 2019 You will need a hose and I would get a one of these so you can change the end easyer Screw that on to your hose and one of these to put your 100 fill adapter on and get one for your s10 aswell And you can un plug each fill adapter saves un screwing the hose every time to fill your s10 you can just unplug it and plug your 100 in straight away if that makes any sense Quote Link to post
si brown 8,486 Posted September 13, 2019 Report Share Posted September 13, 2019 if you've already got a gauge and tap I recon this is what you'll need.. can't be 100% though... stick a photo of your bottle on then you won't order the wrong fitting https://www.bestfittings.co.uk/shop/airgun-charging-equipment/cylinder-accessories/din-male-fitted-with-microbore-ultima-hose/ Quote Link to post
waltjnr 5,957 Posted September 17, 2019 Author Report Share Posted September 17, 2019 Quote Link to post
waltjnr 5,957 Posted September 17, 2019 Author Report Share Posted September 17, 2019 Quote Link to post
waltjnr 5,957 Posted September 17, 2019 Author Report Share Posted September 17, 2019 Cheers for help guys, I'm guessing I need some sort of male fitting at the bottle end? Quote Link to post
Jonjon79 13,340 Posted September 18, 2019 Report Share Posted September 18, 2019 https://m.ebay.co.uk/itm/DIN-232-300-Bar-PCP-Air-Gun-Rifle-Charger-Filling-Charging-Adapter-24-Hose/312648703882?ul_ref=https://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=2&pub=5575376664&toolid=10001&campid=5338268676&customid=Cj0KCQjwiILsBRCGARIsAHKQWLMN__TNQ2duyNIu2fxRJcMFQbeeiWp3sv6b5-NuETXr6BKmmeNLw84aAn-CEALw_wcB&lgeo=1&item=312648703882&srcrot=710-53481-19255-0&rvr_id=2114475472158&rvr_ts=4311a78e16d0a4e83904bc6bfffa796b&_mwBanner=1&_rdt=1&ul_noapp=true&pageci=fd562777-35d3-4a04-bb1 Hopefully that link will work Walt ........ you need the whole whip assembly and, to make life easier, one of the snap fittings above. Quote Link to post
waltjnr 5,957 Posted September 18, 2019 Author Report Share Posted September 18, 2019 Once again thanks chaps Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.