Help, again!

[waltjnr 5,952]

What do I need to charge my newly acquired HW100, my only pcp is a BSA S10, so just screw my buddy bottle into a block on top of my bottle, so guessing I need some sort of hose to connect? 

[eddytom 286]

You will need a hose and I would get a one of these so you can change the end easyer 

Screw that on to your hose and one of these to put your 100 fill adapter on and get one for your s10 aswell 

And you can un plug each fill adapter saves un screwing the hose every time to fill your s10 you can just unplug it and plug your 100 in straight away if that makes any sense 

[si brown 8,486]

if you've already got a gauge and tap I recon this is what you'll need.. can't be 100% though... stick a photo of your bottle on then you won't order the wrong fitting

https://www.bestfittings.co.uk/shop/airgun-charging-equipment/cylinder-accessories/din-male-fitted-with-microbore-ultima-hose/

[waltjnr 5,952]

[waltjnr 5,952]

[waltjnr 5,952]

Cheers for help guys, I'm guessing I need some sort of male fitting at the bottle end? 

[Jonjon79 13,340]

https://m.ebay.co.uk/itm/DIN-232-300-Bar-PCP-Air-Gun-Rifle-Charger-Filling-Charging-Adapter-24-Hose/312648703882?ul_ref=https://rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=2&pub=5575376664&toolid=10001&campid=5338268676&customid=Cj0KCQjwiILsBRCGARIsAHKQWLMN__TNQ2duyNIu2fxRJcMFQbeeiWp3sv6b5-NuETXr6BKmmeNLw84aAn-CEALw_wcB&lgeo=1&item=312648703882&srcrot=710-53481-19255-0&rvr_id=2114475472158&rvr_ts=4311a78e16d0a4e83904bc6bfffa796b&_mwBanner=1&_rdt=1&ul_noapp=true&pageci=fd562777-35d3-4a04-bb1

 

Hopefully that link will work Walt

........ you need the whole whip assembly and, to make life easier, one of the snap fittings above.

[waltjnr 5,952]

Once again thanks chaps