Sausagedog 7,381 Posted July 13, 2019 Report Share Posted July 13, 2019 Still not truly content with the trigger work I have done to the Marlin 990 I found the cause of my dissatisfaction. It's requirement for a disconnector system means in a sense it can feel like a three stage trigger which is frustrating. There is no creep from the seer at all, just this annoying third movement between trigger 1st stage and the seer breaking. After much studying I decided to remove the trigger 1st stage by adding an adjustable M4 grub screw to act immediately on the disconecter. After some trial and error I have adjusted the grub screw so it just allows the disconnector to align with the seer when the bolt returns to battery. Now I have a two stage trigger all be it a short first stage but now when it stops I know any more pressure will break the seer and no other annoying movement. Just need a field test to confirm it is a safe and reliable modification. SD. 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.