the nw hw100 bullpup

[The one 8,395]

For nearly £12 00  it doesnt look the part for me 

[mattwhite 1,992]

Thanks phil

[bigmac 97kt 13,730]

Some thing me and pav were talking about the other day

and i was talking to si about it last night

no one has yet jumped on the band wagon yet a

BULLPUP SPRINGER

mark my words in this bullpup frenzy

how long before they do

you saw it here first

atvbjimmy

[Jonjon79 13,340]

14 minutes ago, bigmac 97kt said:

Some thing me and pav were talking about the other day

and i was talking to si about it last night

no one has yet jumped on the band wagon yet a

BULLPUP SPRINGER

mark my words in this bullpup frenzy

how long before they do

you saw it here first

atvbjimmy

There was an aftermarket bullpup set up for the TX a while back - I think one of the tuners was doing them.

 

I can't remember who it was but, I thought it looked useful

[bigmac 97kt 13,730]

1 minute ago, Jonjon79 said:

There was an aftermarket bullpup set up for the TX a while back - I think one of the tuners was doing them.

 

I can't remember who it was but, I thought it looked useful

Hw97 bullpup

tx200 bullpup

some one will end up doing them

just watch lol

atvbjimmy

[Jonjon79 13,340]

11 minutes ago, bigmac 97kt said:

Hw97 bullpup

tx200 bullpup

some one will end up doing them

just watch lol

atvbjimmy

Fingers crossed mate - I'd be very interested in a professionally done TX

[philpot 4,925]

• It will take a big fella to cock a bullpup  springer.You will be fine though Jimmy but me.........well I suppose I could get a pal to help. 

          Phil

[Rez 4,957]

Took me a while to find this but some sidelever custom job was made in the US. Found this when I saw that aftermarket one Jon mentioned a while ago. 

Some decent images in this, shows the whole process. 

https://www.gatewaytoairguns.org/GTA/index.php?topic=77148.0

[philpot 4,925]

I have to say Rez, I do like those, never thought of a side lever.

Phil

[smithie 2,424]

The bull pup is Ugly. Looks like a military gun with 12 ft lb or less,  not a good thing imo

[Jonjon79 13,340]

1 hour ago, Rez said:

Took me a while to find this but some sidelever custom job was made in the US. Found this when I saw that aftermarket one Jon mentioned a while ago. 

Some decent images in this, shows the whole process. 

https://www.gatewaytoairguns.org/GTA/index.php?topic=77148.0

Good link Rez

........ I'll have a proper read later but, I like the work he did on the piston.

[philpot 4,925]

Just been through that article and hats off to the man for the work done, it is so far away from anything I could do and only wish I was actually capable of doing that sort of engineering and woodwork.

Phil

[Rez 4,957]

5 hours ago, philpot said:

Just been through that article and hats off to the man for the work done, it is so far away from anything I could do and only wish I was actually capable of doing that sort of engineering and woodwork.

Phil

Too right mate. Great work init. Great post and breakdown. Even if the rifle is shit, you can’t fault the commitment he’s put in.

To be honest, the rifle looked so mint with the white looking stock and proper shrouded barrel .

[j j m 6,479]

id like to see a tx done in one

[Deker 3,450]

Gun design continues to evolve primarily due to technology.

Aesthetics are very personal and we tend to get used to things, just the same, having something you are happy with the look and feel of in your hands "can" help performance....bit like your girlfriend, the ugly ones may perform as well, or even better, than the pretty ones, but …………….!