Jump to content

Recommended Posts

It is an idea that has been floating around in my head for a while....using wast oil to fire a forge up to welding temp. Anyone that does much forge welding knows fuel is expensive!

 

I was looking to keep it as simple as possible so gravity fed fuel and low pressure air with no fancy nozzles to get clogged.

 

This is the solution i came up with.

 

Based around an old propane bottle. Filled with water and cut top and bottom off.

 

?key=d18101abb16953913ed6c4082bc7261eb257f8fdc0e566786fc7ed37da6d01e0-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4MDUvNDYwMDQ0NzA3NzVfOWU0YjJhNWRkNF9iLmpwZw%3D%3DP1090436 by Terry Griffiths, on Flickr">?key=55eab98931f91b75c5097f6f02364f89ba12ef9f4c44bd835295eb9b9b0d1e04-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4NTYvMzMwNDM0OTQwMzhfNTBmYmM3YWJmZV9iLmpwZw%3D%3DP1090437 by Terry Griffiths, on Flickr">?key=d48a983e041b7fc6a247d0234cd77ee4cbd645e177a3a3506d839daa762ba9c6-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4OTEvMzk5NTQwODg5MzNfYTE0ODQ5YTFiZF9iLmpwZw%3D%3DP1090438 by Terry Griffiths, on Flickr">

 

Brake disk welded on vent end and an old chimney pot for the inner skin.

?key=d52933aa64dfcb7dd35161217fc3bb3b8cbdc36fa8ac11db6a73be849a6054ed-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4NzkvMzE5Nzc2ODAzODdfYWMzYWI1Y2QwYl9iLmpwZw%3D%3DP1090440 by Terry Griffiths, on Flickr">?key=0f53ff2d300c6e09f6652b6926e39a60ae27f0e68f567e6272d2d1a88259ce48-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4MjIvMzE5Nzc2NzIwMjdfODU1OTBiYjM4YV9iLmpwZw%3D%3DP1090442 by Terry Griffiths, on Flickr">?key=6cb74bb006cdbfb18bb94521e5cf338236f1117fb74a99ae920f01889cf4a238-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4NzcvMzMwNDM1NjA5OThfZjYwODA5OTZhMV9iLmpwZw%3D%3DP1090443 by Terry Griffiths, on Flickr">

 

Ceramic wool on the inside of the door, base and between the pot and the steel bottle.

?key=6fd5af9313498336617ae5fa1b2166049351ab3b32b9bcf8a449a857b391e088-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4NzQvNDY4NjY3MzI3MzJfZjg1MjdiNWNhNV9iLmpwZw%3D%3DP1090444 by Terry Griffiths, on Flickr">?key=04342d015408ccdc08ce4e5b3fabc2772f1dfa0252ea881d4583f391fd3bd787-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4MzgvNDY5MTg4ODg2NTFfMDUzNjFlYzJmZV9iLmpwZw%3D%3DP1090445 by Terry Griffiths, on Flickr">

 

Painted rigidizer on the ceramic wool on the door and around the pot, layed a piece op polythene on and closed tight and let it dry. The pot was left 20mm proud so it pushed into the wool and formed a checked seal.

?key=83a48fd64c83fa682e2aa640b36095771ab56d76900f88d9b72419abeb682c92-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4MzEvMzE5Nzc2NTg5ODdfNDVlNTNkOWI3YV9iLmpwZw%3D%3DP1090446 by Terry Griffiths, on Flickr">

 

Cored a hole through the lot for the burner.

?key=0adaf88322be58c6fb4c9cec24735de99f9b33ae47c1d6b418a8035b98d6d04d-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4NDMvNDYwMDQ0NDA5OTVfZWY4YmFlNGY5MV9iLmpwZw%3D%3DP1090447 by Terry Griffiths, on Flickr">?key=e5bcd99c3223ba601976fe3745ef2c7489e42509ab79b6c86399cce5a735da39-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4NzEvNDY4NjY3MTYxMTJfOWMzMzk4MDRlNF9iLmpwZw%3D%3DP1090448 by Terry Griffiths, on Flickr">

 

Burner 50mm scaffold pipe with stainless milker nipple nozzle on the end. Something like a 8mm steel pipe down the middle for an oil feed. Initially i left the end of the air pie restricted thinking it would spray the oil better but it restricted the air flow too much so i cut it back to nearly full bore.

?key=0d961a7ae7e155e66f23ef03bac616d3356ee46243d8cb06f879b5643f01e926-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ5MDUvMzMwNDM0NTYwMzhfMDFkM2M5MDRhMV9iLmpwZw%3D%3DP1090449 by Terry Griffiths, on Flickr">?key=1bd224a41b88fd03d54d0239619d654e529977f6f427820db0ec56be8ba7db0e-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc5MDIvMzMwNDM0NTI1MzhfZWUyZjZiYjE0NF9iLmpwZw%3D%3DP1090450 by Terry Griffiths, on Flickr">?key=a5a23b4b30897e81f90e269032d2ce41d1a5073414c5d733bc3f9e676960e137-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4MzkvNDYxOTQwMTQxNTRfYjIyZmNhZTQ0Zl9iLmpwZw%3D%3DP1090451 by Terry Griffiths, on Flickr">?key=6481adccfed8f7d28e4718d29c8947f986dd5ebfab472a07e1f00e452817a268-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4ODMvNDY4NjY3MDM4NzJfNGMzMzFjYmY0NV9iLmpwZw%3D%3DP1090453 by Terry Griffiths, on Flickr">?key=8b469b799af62bab370016a0b588f512bb2f04d3de526e530fc002477d7baddf-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4MTcvMzMwNDM0NDExNDhfYTVjOWY1ZTk4Zl9iLmpwZw%3D%3DP1090454 by Terry Griffiths, on Flickr">

 

After first fire the chimney pot is cracked but still in tact. I put o piece of stainless steel 6mm plate in the chamber where the oil lands. This needs to be red hot for the oil to vaporize and ignite. The first burn i just threw some paper and sticks in and lit them up then started injecting oil and air. For the next burn i added a quick hitch point pr a propane line to pre-heat before starting the oil injection.

 

?key=52f43d80135d54c1330fc587ef5d99ffdb4cf13d1b02cd3339feca7f1a01df3c-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4NTIvNDY4NjY2OTkzNDJfNjMzYzZlMjg0Ml9iLmpwZw%3D%3DP1090455 by Terry Griffiths, on Flickr">?key=73375e71718625bff801b8a2b86c5bc5504d6c72272313eb50c2947f60941be6-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4NzEvNDY5MTg3NjI5MzFfOWFhZTc0M2RjY19iLmpwZw%3D%3DP1090456 by Terry Griffiths, on Flickr">

 

Pics of the assembled unit. Waste oil holder is just a plumbers gas bottle with the bottom cut off and a simple tap to control the oil flow.

 

?key=df2db0071a7a4525bdefbbe5502f4aab647c39e2918a132f09ccc6714acb3e62-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc5MTUvMzE5Nzc2MzkwMDdfNTgwNTc2MzcwOF9iLmpwZw%3D%3DP1090457 by Terry Griffiths, on Flickr">?key=6c5bbdab82ca8089fd23495e90d60d1202004c683632508385d48d8c96d1e998-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4MzQvNDYwMDQ0MTE1NDVfNDJlN2NhNDVjYl9iLmpwZw%3D%3DP1090458 by Terry Griffiths, on Flickr">?key=a06da86d5a197812afef6a6c84d6e3ced36e0e2e5fd512dbd688c202581a404d-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4NTQvNDYxOTM5OTE3MzRfYTZmMDIyZjMxNF9iLmpwZw%3D%3DP1090459 by Terry Griffiths, on Flickr">

 

Here she is on her maiden run at forging steel. Ever optimistic i went for forge welding straight off. About 12 strands of bed spring and 4 strips of file welded in a bundle then forge welded like a cable weld, twisting them together. These pics are all with the burner shut off, just the after glow!

 

?key=676a50ae20d62b75d6e0a4d24a068ad90d76dc8f1583ee88c66957a807e6c48e-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4ODQvNDY5MTg3NDgyMDFfMGU0MWVjMmU4N19iLmpwZw%3D%3DP1090462 by Terry Griffiths, on Flickr">?key=36ab2a19bbd49bd0eab1bdc81605e460e50661b28f04a418f706ed44df413544-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4MDYvMzMwNDM0MTE3ODhfODU5M2M0ZDkxNF9iLmpwZw%3D%3DP1090463 by Terry Griffiths, on Flickr">?key=d4358dde45aca5d97760a8c237a5d674d9d67a64f5a49caf0ec97bd52a35e64a-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4OTEvNDYwMDQ0MDQyNjVfMjE1MzQyNDgxMV9iLmpwZw%3D%3DP1090461 by Terry Griffiths, on Flickr">?key=3948cbbda1d99faac3b59e2db10bd15d981d72fd71dca77f9c92f02a313151cb-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4MjQvNDY5MTg3NDIzODFfOGUzMjk5ZDMyZl9iLmpwZw%3D%3DP1090465 by Terry Griffiths, on Flickr">?key=95bf146c4d5b26403bb42a45aaff7a9090840839ca71d66d50cc63e777398923-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc5MTgvMzMwNDMzOTg1ODhfYWVkNzAzYWYxZV9iLmpwZw%3D%3DP1090468 by Terry Griffiths, on Flickr">?key=c3ee3c2277c5c4d69fad0bb1813cdf58b3600592699d34d2224ed514a64aabd5-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4OTMvNDY5MTg3MzE3MzFfNTYwOWM0M2Q5MV9iLmpwZw%3D%3DP1090469 by Terry Griffiths, on Flickr">

 

This thing pumps out insane heat. After running at welding temps for a couple of hours it has actually started to melt the fire-clay chimney pot! May replace it with fire-bricks or refractory, but will wait till it disintegrates,

 

?key=0a3876d2223dc2e75bbf9624f47640fce0cff371c04670ff5872921e2b7f4a0c-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4MDYvMzMwNDMzODg5NzhfZjE0YTI5YWEyYl9iLmpwZw%3D%3DP1090470 by Terry Griffiths, on Flickr">?key=55efbca4770b1042d35b59dbbcbe79d276e2043b5f7d7353a97c275ff38b389e-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc4OTAvMzE5Nzc2OTUwMzdfNWRhM2U1ODM2YV9iLmpwZw%3D%3DP1090471 by Terry Griffiths, on Flickr">

 

In summary: The whole thing was built entirely from scrap.The fuel is even free. The only thing i paid for was the ceramic wool and welding rods. Best used outside. It burns surprisingly clean but i wouldn't chance running it in an enclosed space. The blower is an old variable speed hoover...again off the dump. It pumps out insane heat but is quite adjustable. It will light up again without pre-heat half an hour after the previous shut down....just turn on the oil and air.

 

Finally here is the forge welded Damascus blank.

 

?key=00b4ed4a1affbc40af0f166137c0a1b9073dcf8a9be3b026c81b9a7cdb963596-aHR0cHM6Ly9mYXJtOC5zdGF0aWNmbGlja3IuY29tLzc5MTYvMzk5NTYyMDIxMTNfZmI3NWYxZDAwYV9iLmpwZw%3D%3DP1090474 by Terry Griffiths, on Flickr">?key=56df6e7b35b724af189af1aa2802e32a0039d75f4a0a088e1b4f5778357dc988-aHR0cHM6Ly9mYXJtNS5zdGF0aWNmbGlja3IuY29tLzQ4MDYvMzk5NTYxOTkwMjNfZDUwMGI3NDBlNF9iLmpwZw%3D%3DP1090473 by Terry Griffiths, on Flickr">

  • Like 12
  • Thanks 4

Share this post


Link to post
Share on other sites

Griff mcgyver strikes again 👍👍👍 ......

  • Like 1

Share this post


Link to post
Share on other sites

Nice one Griff, proper job.

I used the wifes hairdryer and stoked the fire with coal lol

Think the metal came out softer than it went in 😊

  • Like 1

Share this post


Link to post
Share on other sites

Yr fckg mad yeh mad bastd. Good on yeh. Jok.

Share this post


Link to post
Share on other sites

Aye Jok, even mad enough to have a shave with that cut-thought razor you gave me! 😜

Sharpened up pretty good!

20181215_091651.jpg

Share this post


Link to post
Share on other sites

Glad it works for you mate you put some graft into making that 

  • Like 1

Share this post


Link to post
Share on other sites
Just now, GruffaloGriff said:

Had it fired up again today trying a bit of chain Damascus from a motor bike chain.

Are making a canister Damascus mate ??? 

Share this post


Link to post
Share on other sites

Wish you lived by me, great mind on this man atb Flacko 

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, socks said:

Are making a canister Damascus mate ??? 

Yes first canister weld i have tried. Seems to have worked ok. A hydraulic press or a power hammer i think will need to be on my short list of projects!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By riohog
      a few blanks profiled and ground .from 3mm  bohler n690  stainless  ,ready for cyro and heat treatement  .

    • By riohog
      ready for heat treatement !! .cut and profiled from 3.25mm  bohler n690 .  premium austrian stainless

    • By riohog
      skinner  .from austrian  bohler n690 stainless   red g10 over black g10 liners    .handle 

    • By riohog
      profiled and first grind , ,now ready for heat treatement , 2 skinners and 2 deerstalkers field knives      , from german  bohler n690   stainless

    • By riohog
      100mm blade from 14c28n sandvik stainless steel 58,,59rc  after cyro  treatement and temper  .anciant fenland bog oak handle over blue g10 liners          saddle stitched leather sheath .

×