hw100 disaster

[bigmac 97kt 13,730]

hw100 not so accurate in fact it was a disaster 

never been like this before all ways three clicks and she is on target

its not the scopes there the airmax so i new it was not them

its not been knocked or dropped

only thing i had done was change back to jsb exact

but its all ways been good with them .

at first i could not get it scoped in took the mod off and it was a little bit better at least it was in the target

so i changed back to jsb heavys .

now she was back to her normal self three clicks left and she was on

the two targets look like a scatter gun was shot at them lol

so today i cleaned the mags as i noticed the pellets were tight when i put them in (never been like that before no mater what pellets i used)

cleaned the mag port and the breach oiled the probe and cocking arm.

you should of seen the crap that came off the mags

and mag port and breach .

any way pellets are back to just sliding into place in the mag

and every thing is back to being smooth again when cocking

as i did notice a few times last night the cocking arm was sticking when you cocked it and try,d to push it back

just need to test it out now .

atvbjimmy

[bigmac 97kt 13,730]

and the crap that came out of the mags and breach

[villaman 9,979]

Just make sure the barrel is tight , for some reason  my came lose yesterday 

[bigmac 97kt 13,730]

Now im happy

[bigmac 97kt 13,730]

18 minutes ago, villaman said:

Just make sure the barrel is tight , for some reason  my came lose yesterday 

Barrels ok Mitch

I used Marks tip of the 3in1 oil on the mags

and even used it to clean them

every thing is smooth now as well it was starting to give a loud click when you pulled the cocking leaver back so i new some thing was not right any way .

but every thing is now sorted PHEW

you know how good the 100,s are they can make a bad shooter look good lol

makes me look like a top marksman

atvbjimmy

[Jonjon79 13,340]

It doesn't get any better than that mate

[bigmac 97kt 13,730]

1 minute ago, Jonjon79 said:

It doesn't get any better than that mate

Cheers Jon thought she was fecked lol

she is only sitting at 10 and a half but she wacks every thing in site so never had an issue with putting the power back up

may be its time to give it to Sean or Si to do just that .

the little target is with jsb exacts so she is even back to liking them again lol

atvbjimmy

[pav 481]

I just power wash the rapid and hang it on the washing line lol that 3 in 1 oil is a godsend

[bigmac 97kt 13,730]

8 minutes ago, pav said:

I just power wash the rapid and hang it on the washing line lol that 3 in 1 oil is a godsend

Wish it was that easy Pav lol

and your right 3in1 oil is a god send lol

how you keeping any way good i hope

atvbjimmy

[villaman 9,979]

Dead easy to up the power jimmy 

[pav 481]

20 hours ago, bigmac 97kt said:

Wish it was that easy Pav lol

and your right 3in1 oil is a god send lol

how you keeping any way good i hope

atvbjimmy

Not to bad Jimmy very busy with this summer bunny cull

[bigmac 97kt 13,730]

37 minutes ago, pav said:

Not to bad Jimmy very busy with this summer bunny cull

Some bag that mate bet your pleased you dont have to skin them lol

if you ever need a hand you know where to get me lol

top class as per bud

atvbjimmy

[pav 481]

That' just the last two nites out just gut them but hard work by yourself

[Rimfireboy! 1,463]

Good tally..

[dayglowfrog 56]

I thought 3 in 1 was a mineral oil don't let it get near any of the o rings .