Jump to content

New Bunny equipment


Recommended Posts

First CZ 452 ,22"barrel .22l/r P/H mod ,Redfield Accuranger 3-9x42 scope ,taking her for a zero tomorrow .Selection of rounds to try ,CCI Segs ,Win subs,Fiocchi subs ,Eleys too .Just get a few bunnys for the pot and some crows before lambing time :D.Cant wait for this rain n fog to do one

20180121_153011.jpg

  • Like 4
Link to post

10 hours ago, Baldcoot said:

Finally the rain stopped and got out at 4,it loved Win subs but hated Blaser .Trigger is a bit too lightly set but that,l get fettled for next week  atb

Good one mate I had to order a new trigger unit from rimfire magic as was too heavy now just right . Won't go wrong with win subs I've tried others but always go back to win subs. Just need your first bunny now :thumbs:.

Link to post
On 24/01/2018 at 20:07, Baldcoot said:

Finally the rain stopped and got out at 4,it loved Win subs but hated Blaser .Trigger is a bit too lightly set but that,l get fettled for next week  atb

I have 2 452's. Both are fitted with YoDave trigger kits. I likes a very light trigger pull!

Link to post
1 hour ago, Baldcoot said:

It actually has 452 ,2E stamped on the barrel Nath so CZ thinks it is ,i genuinely dont know the variations but thats whats written on the tin as it were atb

Well there you go, I was wrong, that's nothing new! 80

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rimfire Rifles Freedom
      Hello all.?
      Just an update as it has been a while.I have been looking for a subsonic .22LR hollow point that shoots well from a cold clean bore and have recently started using RWS subs which do well, typically from the first shot..I have used a few different brands of subsonic H.P.s and they all group quite well after 5 or so fouling shots, but RWS like the cold clean bore,needless to say I am a happy and for me, decent shooting.?.I have used the RWS before in the old Annie 1416 DG and it was equally consistent in that rifle.
      A couple of typical below all from a cold clean bore..My scope is a Hawke Vantage x2 -x7 32mm A.O. with illuminated reticle which is a great field scope but lacks magnification for target shooting so is sometimes difficult to deduce if a shot has been pulled, but I love the scope.
      Have a good weekend all.?


    • By Baldcoot
      Well I got 2 unused table clamps and a need for stability. 
      Cant afford the new style tripods <on furlough pay>,so I thought make your own. So drill n tap m10x1.5 in the base of said bracket .
      Cut 2 pieces 7.5x3.5cm steel plate and fix to clamp .Drill hole and fit split pin to stop wind out in turnscrew. Then cut leather patches to fit and bond with contact adhesive, allowing 24 hours  to cure and Bob's your job.
      Stable, free and hands free atb 



    • By Baldcoot
      Fred J Taylor's book on ferreting, shooting, poaching and lots of recipes. 1 at the end of each chapter free to a good gnome.
      Usual Stravros rules apply ,open to all till 5pm Monday then il pick a random winner and post it to the lucky 1 atb and good luck

    • By Baldcoot
      Friday night thought i,d have a pre pheasant delivery fox mooch .Pardnv 007 on a Hawke Vantage 3-12x50 on top of a cz452 in,22.l/r but with CCI segs in for mr charles .
      Also my spanish pal wanted some bunnies for the b,b,q <his fault the weather,s gone pooh>so the segs  do both ,set off about 10.30pm in squalid dirty patchy fog but i thought helps me to hide and the thermal spotter keeps mr charles in view .4 frustrating hours later old charley boy is a no show so back to the car i stomp.
      Suddenly a suicidal rabbit just pops up from his hole and stares at this big lump in the fog ,well at 10yds even this blind old blinker couldnt miss ,the Pard,s clear unfuzzy picture is sweet and no 1 is bagged after gutting . A nice size buck <meal for 2 > carry on plodding .
      Across the meadow towards the gate a small blobb is being chased by a horny blobb so i put the rifle up and the doe is no 2 for the bbq .Gutted and bagged back to the car i trots.
      Wish id got this sooner its far superior to Photon and sony camera or hawkes own monocular for image quality and range atb and good hunting 

    • By Underdog
      Got chance to test Gavs balls this afternoon! That sounds all wrong!!
      The balls Gav kindly cast and sent me I mean.
      I used an old sign that's lay in the grass for years. Take a look and I will explain.

      I was aiming for the P at 30yds.
      The two shots close to the P and the shot just above them two were the best load chain today. The high one was the aiming, I was seeing to much barrel and the following two responded perfectly to my adjusted hold.
      The other three were a different load and unsatisfactory.
      In saying that the sign easily represents a small deers chest and all six shots would of killed a deer!
      With the good load I should be able to hunt rabbit with.
      Here is the reverse side of the target.

      I love this fusil, it has a fast lock and gets good speed up.
      Got some squirrel with shot too.

      Cheers  Gav, now I know it's worth getting a mould.
       
      U.
×
×
  • Create New...