Jump to content

Recommended Posts


That's a well nice piece of kit as usual mate, have you fired one with tubes on, if so how was it, I seem to be flipping back and forward between flats and 1745 tubes at the mo but the tubes seem to be edging it simply because they last so much longer

Link to post
Share on other sites

That's a well nice piece of kit as usual mate, have you fired one with tubes on, if so how was it, I seem to be flipping back and forward between flats and 1745 tubes at the mo but the tubes seem to be edging it simply because they last so much longer

 

I'd use tapers on 1745 pal semi butterfly draw it's serious speed the tapers to tend to take some of the band life tho , these torques fit so well to the hand tho.

 

Sent from my SM-T710 using Tapatalk

 

 

Link to post
Share on other sites

That's a well nice piece of kit as usual mate, have you fired one with tubes on, if so how was it, I seem to be flipping back and forward between flats and 1745 tubes at the mo but the tubes seem to be edging it simply because they last so much longer

 

I'd use tapers on 1745 pal semi butterfly draw it's serious speed the tapers to tend to take some of the band life tho , these torques fit so well to the hand tho.

 

Sent from my SM-T710 using Tapatalk

yes I know mate I have found a loop of about one third the length to be my favourite, I have one with full loops but I use that for bigger lumps of lead, but for 10mm steels the third loop is my favourite pulled back past my ear,
Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...