Carpet Mill/slat Mill

[Dead Eyes 680]

There's some serious skill and planning gone into those

[king 11,663]

 

20160916_212508_20160916_212538.jpg

Were ive drawn the line put another lengh on angle there.

To support the rollers each side.

We've got to put the other ones together next week so I'll try it and let you know if it makes a difference .

Its just an observation mate thats all.

I was just thinking thats were all the weight is concentrated in the middle of the belt.

[HPR 1,160]

 

 

20160916_212508_20160916_212538.jpg

Were ive drawn the line put another lengh on angle there.

To support the rollers each side.

We've got to put the other ones together next week so I'll try it and let you know if it makes a difference .

Its just an observation mate thats all.

I was just thinking thats were all the weight is concentrated in the middle of the belt.

No that's ok mate always good to hear people's ideas . Like I say you don't normally put wheels in the middle . It's only because we've gone 100mm wider we thought we would do it just incase .

[HPR 1,160]

There's some serious skill and planning gone into those

Cheers mate

[lurcherman 887 12,670]

Good stuff mate

[Rabbit Hunter 6,608]

Well made things them HPR.

[downsouth 6,814]

Nothing close to the quality of them made in the UK. If you wanted anything to match the quality of them you'd have to pay mega money and import something like a chandler from the states

[jiggy 3,207]

They look great a lifetime job do you sell them and how much would it cost for one large enough for a lurcher.

[HPR 1,160]

Nothing close to the quality of them made in the UK. If you wanted anything to match the quality of them you'd have to pay mega money and import something like a chandler from the states

There getting better and better ds . Just sent off a drawing to have the wheels CN machined . So they run proper straight and true . Where in the middle of making and old school looking one . Can't wait to see them product . This one wasn't even adjusted or set up properly and it span 8.5 times .

[Rabbit Hunter 6,608]

Do they have any maintenance needs or components that might wear with use or will they last a lifetime?

[HPR 1,160]

Should last forever mate . Might need the odd bearing over the years but that's nothing . Plus if anything does go wrong . My mate would replace bits anyway .

[HPR 1,160]

Latest one . Just waiting for oak slats to come then we'll have the third one done .

[HPR 1,160]

Oh yeah and got to put the adjustable feet on this

[Craic 203]

Top class them , as said earlier in the thread I will be contacting you next year for two of them when I move to my new base

[HPR 1,160]

Cheers craic