Jump to content

Squirrel Cage Springs

Recommended Posts

Hi All,


Had a squirrel cage trap for a while now had a lot of success with it but the springs now seem to be a bit slack. Do I cut the springs a bit shorter or does anyone know where I can get some replacements?


Thanks for any help



Link to post

Yes I had a look at fourteen acre and the only springs I could see on there are for Larsen mates and are almost twice the length of my ones on the squirrel cage. Might have a look at albi traps as well.

Link to post

Oh it's the extension springs you need ? Not torsion ones.

These are about 150mm so if you only want 90mm they're really easy to cut down. Just cut through with a pair of snips and then bend the first complete right out to 90 degrees


If you could get away with 75mm you could get two out of each.



Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...