beast 1,884 Posted January 2, 2016 Report Share Posted January 2, 2016 (edited) i've got a wood burner i want to put in one of my sheds, any suggestions how to run the chimney through the wall without setting fire to the shed?! thanks! Edited January 2, 2016 by beast Quote Link to post Share on other sites
ryaldinhio 4,125 Posted January 2, 2016 Report Share Posted January 2, 2016 141433514988 type that into fleabay. Thats what I used on mine and my shed is still standing. Quote Link to post Share on other sites
moxy 617 Posted January 3, 2016 Report Share Posted January 3, 2016 141433514988 type that into fleabay. Thats what I used on mine and my shed is still standing. And if your concerned about the walls just put some kingspan on them. Quote Link to post Share on other sites
ryaldinhio 4,125 Posted January 3, 2016 Report Share Posted January 3, 2016 I made a heat shield behind mine with some plasterboard and a section of flue liner, both of which were guna go to the tip! https://db.tt/1LeYAVUG not the prettiest but does the job 2 Quote Link to post Share on other sites
MR TEA POT 1,287 Posted January 3, 2016 Report Share Posted January 3, 2016 141433514988 type that into fleabay. Thats what I used on mine and my shed is still standing. this is what I've got on mine,a flashing kit had mine nearly a year in shed now no problems at all with it 1 Quote Link to post Share on other sites
lady hunter 162 Posted January 3, 2016 Report Share Posted January 3, 2016 You will need a twinwall kit. Quote Link to post Share on other sites
beast 1,884 Posted January 3, 2016 Author Report Share Posted January 3, 2016 thanks everyone. so having now researched the information you have provided, here is my plan insulated fireboard surface beneath stove and on wall directly behind it twein wall insulated flue where it passes through the roof dektite/ flashing kit to seal round chimney on top of roof does this sound about right? how high do i need to have the top of the chimney above the roof just in case of sparks? should i fit a spark trap? cheers Quote Link to post Share on other sites
moxy 617 Posted January 3, 2016 Report Share Posted January 3, 2016 You should only need about 18" but it will depend on how sheltered your shed is for the smoke clearing. If you have little or no air flow or protected in by a high hedge for example, the exhausting smoke can be pushed back down (outside) and recirculated back into your shed. Then you will need a higher flue The rest sounds about right. You can pick up stainless lagged twin wall from the scrapyard. Quote Link to post Share on other sites
beast 1,884 Posted January 3, 2016 Author Report Share Posted January 3, 2016 thank you!! Quote Link to post Share on other sites
j j m 6,479 Posted January 4, 2016 Report Share Posted January 4, 2016 good idea thought about doing this for a while now Quote Link to post Share on other sites
lady hunter 162 Posted January 4, 2016 Report Share Posted January 4, 2016 What moxy said is bang on.i am a hetas installer and guild sweep and it sounds good Quote Link to post Share on other sites
beast 1,884 Posted January 4, 2016 Author Report Share Posted January 4, 2016 Great stuff, cheers for the advice. i will let youknow how i get on Quote Link to post Share on other sites
bob84 189 Posted January 4, 2016 Report Share Posted January 4, 2016 image.jpg use the same one in a tipee hasn't burnt down yet haha atb AT if you don't mind me asking where did u get the tepee from. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.