shadow_sniper 47 Posted October 31, 2015 Report Share Posted October 31, 2015 (edited) Hi guys my scope is zerod at 25 yards. Just wondering if I will still be smack on at 35yards if I still aim dead on? And 1 mildot at 45 yard? Using 177. Atb Nick Edited October 31, 2015 by shadow_sniper Quote Link to post
villaman 9,979 Posted October 31, 2015 Report Share Posted October 31, 2015 Depends on scope hight , pellets , mag on scope and FPS Quote Link to post
pernod 466 Posted October 31, 2015 Report Share Posted October 31, 2015 Why don't you put targets out at the ranges mentioned and note where the impact points are... easy. Pernod 3 Quote Link to post
villaman 9,979 Posted October 31, 2015 Report Share Posted October 31, 2015 Why don't you put targets out at the ranges mentioned and note where the impact points are... easy. Pernod Very true ,but he might need to know now for some reason Quote Link to post
shadow_sniper 47 Posted November 1, 2015 Author Report Share Posted November 1, 2015 Thanks Timmy I'm going to rezero at 35yards tomorrow many thanks Atb Nick Quote Link to post
mark williams 7,549 Posted November 1, 2015 Report Share Posted November 1, 2015 Ditto to all the above I have just zeroed my TX 200 .177 to exactly 36 yards, using AA Fields 8.4 grain and she is giving me a zero from 9 yds to 41 yds. By zero i mean she is firing a pellet within a one inch circle within those ranges.After 41 yds hold over will start to be required and you need to calibrate you rifle and scope, (take note of your mill dots/ pellet impact every 5 yards) I am expecting very "similar" from my HW 100 kt .177 using AA Fields 8.4 grain also. Take a look at - "Best zero ranges" in the search engine top right of this page. atb Quote Link to post
David.evans 5,323 Posted November 1, 2015 Report Share Posted November 1, 2015 40 yards for me with 10 .4 jsb Fps - 710 Poi at range 60 yards -4.3/4 inches Mag - 8.5 Gives a half mill dot hold over at 5 yard increments Out to yards , not that any body would shoot that far with a .177 Atb Quote Link to post
Rez 4,957 Posted November 1, 2015 Report Share Posted November 1, 2015 For what it matters, my 100 is zeroed at 32 yards (4.52 AA Fields). Meaning the pellet never leaves a 1 inch circle out to 41 yards. Quote Link to post
shadow_sniper 47 Posted November 1, 2015 Author Report Share Posted November 1, 2015 Don't matter guys there's something wrong with rifle if you have seen my other posts. Quote Link to post
David.evans 5,323 Posted November 2, 2015 Report Share Posted November 2, 2015 Can't find your other posts ss What's wrong with your rifle ? Atb Quote Link to post
shadow_sniper 47 Posted November 2, 2015 Author Report Share Posted November 2, 2015 (edited) Will group at 25 yards and not at 35 just spits all over place one min will group next it won't... Someone suggested cleaning barrel.. Atb Edited November 2, 2015 by shadow_sniper Quote Link to post
David.evans 5,323 Posted November 2, 2015 Report Share Posted November 2, 2015 Strange What pellets u using Quote Link to post
David.evans 5,323 Posted November 2, 2015 Report Share Posted November 2, 2015 Try taking off the mod , and zero , it might just be clipping ? Atb Quote Link to post
shadow_sniper 47 Posted November 2, 2015 Author Report Share Posted November 2, 2015 Crossman prem mags Quote Link to post
David.evans 5,323 Posted November 2, 2015 Report Share Posted November 2, 2015 If yove not changed pellets , the barrel should be fine Just make sure all you scope bolts are tight It's trial and error , unless you've banged the scope and it feced Atb ss Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.