Jump to content

Not Filling Properly


Recommended Posts


what happens when you fill past 130 bar, also when you run down the air past a certain pressure, some air rifle valves require a certain pressure left in the cylinder to keep the valve closed, run right past this point and it will require a sharp blast of air from the fill bottle to shut it so it can be filled up again

Edited by Girlypants
Link to post

first thing, as i said above, when the rifle reaches lower than 100 bar, theres not enough pressure keeping the valve closed so it dumps all the air left in cylinder, to fill back up cock the bolt back and keep it back so that its not pushing against the valve holding it open a bit, then give it a blast, dont go too mad and it will close the valve up, soon as it starts taking air again slow down the input of air and fill as normal

 

you might have another problem not related to this but its worth a try, just be careful

Edited by Girlypants
Link to post

if its not filling past 130bar,then your bottle needs filling up?

good point, i naturally assumed that was all checked, if when filling the rifle, the gauge on the bottle reads 130bar with the valve fully open on the bottle then the bottle needs filling :)

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...