eddietrooper 3 Posted January 26, 2015 Report Share Posted January 26, 2015 How do was our last foxing an had nice shot an missed was defo on it then realised later ma mod was slack and the bullet has mark the baffles a little does any one think this will effect future shots Quote Link to post
SportingShooter 0 Posted January 26, 2015 Report Share Posted January 26, 2015 I'd test it on paper and see what it groups like Quote Link to post
eddietrooper 3 Posted January 28, 2015 Author Report Share Posted January 28, 2015 Cheers tested it appears to be around the same as when I set up earlier so hope that is ok think I've been very lucky thanks for the quick response Quote Link to post
shropshire dan 467 Posted January 28, 2015 Report Share Posted January 28, 2015 One thing I've been advised on is to make sure I take off the silencer whilst in the safe. You may already know this but thought id suggest it Quote Link to post
eddietrooper 3 Posted January 29, 2015 Author Report Share Posted January 29, 2015 Thanks was told to do this when I bought the rifle was after cleaning an ended up going back out just wished I'd checked it but you learn from mistakes you make happy hunting Quote Link to post
shropshire dan 467 Posted January 29, 2015 Report Share Posted January 29, 2015 Fair enough mate. But to be honest I never test my bullet rifles before hunting. My .22-250 after a barrel clean I just put a couple of fouling shots through as I did the same thing once and missed a fox remembering that a few days Previous I cleaned the barrel. Once I put a couple of fouling rounds through it was spot on. So I now know after a clean it and fouling shots it's good for around 50 shots. I currently don't use a mod but am planning on getting a T8 for it. Quote Link to post
jollyscotsman 11 Posted February 4, 2015 Report Share Posted February 4, 2015 Ide address this asap bud,clipping will indeed throw the round off,or worse!!!,closer inspection of your mod as to why this is happening is needed my friend. Quote Link to post
eddietrooper 3 Posted February 4, 2015 Author Report Share Posted February 4, 2015 Hello I no the reason for this was my error due leaving it slack after I cleaned it and going back out memory like siv thanks for in put Quote Link to post
jollyscotsman 11 Posted February 4, 2015 Report Share Posted February 4, 2015 Yup that'll do it,obviously its had a wobble when the rifles barked, and clipped, lesson learned bud Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.