Robbo1234 2 Posted September 7, 2014 Report Share Posted September 7, 2014 Hi I was just wondering whether you could swap the bolt to the left hand side on the bsa ultra so that it suits cack handers like me? Or can you get ultras in a left handed stock? Quote Link to post
shadow_sniper 47 Posted September 7, 2014 Report Share Posted September 7, 2014 Se tac stock is ambidextrous Quote Link to post
Skot Ruthless Teale 1,701 Posted September 7, 2014 Report Share Posted September 7, 2014 Se tac stock is ambidextrous If you swap the bolt around it will be 'upside down' and look silly. Someone like rowan engineering etc might make a left handed bolt.. the stock had a cheekpiece on both sides so apart from the upside down bolt it would still be left hand friendly Quote Link to post
Rez 4,957 Posted September 7, 2014 Report Share Posted September 7, 2014 Might of posted on this in another forum. Skot. I 'think' you can just mirror the bolt so to speak, like turn it round so it's literally the other way... Regarding the pull up and back motion, it's might f'kit up. I thought about doing it with my own SE. I know there is a way. Perhaps the rowan way. Quote Link to post
Skot Ruthless Teale 1,701 Posted September 8, 2014 Report Share Posted September 8, 2014 I mean like the s200 has a 'straight' bolt handle bit.. but the ultra is curved downwards to the right so if you change it round to the left it will curve upwards.. am i making sense? Lol Quote Link to post
SimonC_Here 36 Posted September 8, 2014 Report Share Posted September 8, 2014 There is a strip guide on AGF if you are a member: http://www.airgunforum.co.uk/forums/showthread.php/176287-BSA-Ultra-SE-Single-Shot-Stripdown-Guide Might help you to see what needs to be done. From the pics there is something to stop you rotating the bolt in the other direction as you would have to do if you just flipped the bolt handle over. so I don't think it's going to be simple unless you go with Skot's curving upwards bolt. Simon Quote Link to post
Rez 4,957 Posted September 8, 2014 Report Share Posted September 8, 2014 I mean like the s200 has a 'straight' bolt handle bit.. but the ultra is curved downwards to the right so if you change it round to the left it will curve upwards.. am i making sense? Lol You are indeed. Quote Link to post
villaman 9,979 Posted September 8, 2014 Report Share Posted September 8, 2014 Have a word with Darrin XTX AIR Quote Link to post
Adam1010 0 Posted November 22, 2014 Report Share Posted November 22, 2014 On my bsa I switched it over and it was literally just a case of switching it round. Seems to be working fine for me. Only trouble is now the safety's on the wrong side :/ Quote Link to post
Adam1010 0 Posted November 22, 2014 Report Share Posted November 22, 2014 On my bsa I switched it over and it was literally just a case of switching it round. Seems to be working fine for me. Only trouble is now the safety's on the wrong side :/ Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.