Wanted Rabbitstopper Barrel Wanted Crosman 2260

[tylerasker 6]

Looking at modifying my rattie so after longer barrel and maybe steel breech. Thanks

[Colin g 45]

TW Chambers, £35.00

[Bongonaut 8]

Looking at modifying my rattie so after longer barrel and maybe steel breech. Thanks

Don't do it....been there done it...end up spending a fortune...before you know it you've spent 200 hundred....chambers may have to send the barrel to your local RFD ....unless you "send" one in for "repair"...

Seriously though once you've fitted a modded breech,barrel,updated gas valve,adjustable hammer,trigger...compressed air conversion ..etc etc... You'll still only have a modified ratty standing you at £££,s with a crap barrel and fires all over the place with a really steep power curve(co2)...

I did all the above....then sold it lost a fortune and bought a cracking Airarms s200 multi shot for £200 notes...which is just as accurate (IMHO) as any rifle out there...

Just a thought....

But then again it was fun doing it......:-)

[tylerasker 6]

 

Looking at modifying my rattie so after longer barrel and maybe steel breech. Thanks

Don't do it....been there done it...end up spending a fortune...before you know it you've spent 200 hundred....chambers may have to send the barrel to your local RFD ....unless you "send" one in for "repair"...

Seriously though once you've fitted a modded breech,barrel,updated gas valve,adjustable hammer,trigger...compressed air conversion ..etc etc... You'll still only have a modified ratty standing you at £££,s with a crap barrel and fires all over the place with a really steep power curve(co2)...

I did all the above....then sold it lost a fortune and bought a cracking Airarms s200 multi shot for £200 notes...which is just as accurate (IMHO) as any rifle out there...

Just a thought....

But then again it was fun doing it......:-)

I'll take that on board. Lol.

I bought a rough one last week but ssomeone has started cutting the barrel then stopped leaving a nasty gash behind, and also the crossman scope mounts have lots of play in them allowing the scope to move side to side. Just figured a steel breech and new barrel would up the power a touch, and also be the cheapest solutions to my problems. Thanks

[Colin g 45]

Normally cheaper to buy one thats already done buddy as you can easily spend a couple of hundred on improving them, Or get a king ratty that has the breech block fitted as standard, You will hit bugger all with the standard ratty mounts as you know, Lol.