Advice Sourcing Mk3M Collar Parts

[Mr Whippy 1]

Ey up

 

Need a bit of advice regards parts for one of my MK3M Collars.

 

If you unscrew the collar and look in the bottom half of the collar you can see a silver metal conductive part that's glued in. It's used to complete the circuit when the batteries are in and the collar is screwed back together.

 

Some how I've managed to lose that little silver metal part.

 

Any ideas on what I'd need to replace it? I'm guessing I could try Maplins for some type of generic conductive metal sheeting and cut it to size myself. I was wondering though if it needs to be a specific metal or if anyone knew where I could just source a replacement part.

 

Cheers

[gak25 16]

Can't you use a piece of copper ?

[Mr Whippy 1]

I think it needs to be something fairly rigid as a piece of the part is sort of sprung to give it some resistence against the batteries

[Jamie m 668]

Try emailing deben

[The one 8,396]

Try emailing deben

Good luck there after sales service is crap

[PETEWINN 5]

Deben are the obvious choice.

 

If you are lucky they many send you the bit for free. All depends who deals with you, sometimes they don't want to know, others they are wonderful.