Jump to content

every week at my forge and workshop(updated)


Recommended Posts

hi penny , yeah its the plan for next year to stand a couple of shows . to have a well stocked stall will take me months to get organised and finnished , thats ok because i think it will be very quiet around xmass and after . and anything that dont sell will sit here waiting .

its taken me all day to get all the parcels wrapped triple checked and then down the post office , and once that was done it was ordering the laser cut blades , (that is one massive job very expensive to do and long winded ) its done now and in 1 week i should have 60 blanks here !!

its alot of pressure because it the designs are wrong and nobody likes them , im screwed !

im also attempting to take on the mora knife with one of my own , might be closer to £30 than a tenner but will be 100% british and still handmade , so you will have to watch this space for them .

 

a note to anyone who is expecting a delivery , they are on there way first class recorded . some if not all have protective mist of oil on them , so dont panic just wipe it away or use thinners to remove .

Link to post
Share on other sites

  • Replies 985
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

ok guys busy week here for me again . lst week mas production this week finnished knives of a slightly higher calibre ! first job of the week socks sent this knife for a refurb . bit of elbow g

Great work Matt, and knives that will last a lifetime with care. Remember lads this is Matts living, not a hobby. Try not to knock him down on price, the knives / blades are worth every penny, and m

boar knife not a true "how to" but just a little write up following the construction of a knife from a file to a "boar knife" i had a similar knife planned but after a pm from a hunting life member

Posted Images

joed81,- When you say Ray Mears blade, do you mean Alan Wood or SWC blade. (maker )

Take away the name, and what is the difference between Matts blades. Same quality steel, and same quality.

  • Like 1
Link to post
Share on other sites

thanks gin .

knowing how the woodlore's are made , what of , grind etc there is nothing but a name that seperates mine from theres , and a massive price tag of £400 - £600 i dont know how they justify them ?

even hand forges damascus or mosaic would not come in at that price .

i would want mosaic blade, walrus tusk or mamoth tooth handle with a world class sheath for that money !

each to there own i spose , but how do you dare ever use it ?

Link to post
Share on other sites

It was the Alan Wood blade. I think I can see from the pics that you are making some quality peices here. I actually got a damascus steel knife from Citadel when I was out in Cambodia and I nearly sold the other week, thankfully no one was interested. I did see a blad towards the beginning of the thread which had a white handle, not sure if it was bone I was skim reading and had some sort of red lining under the handle. I would be interested in a knife simialr to that.

Link to post
Share on other sites

thanks gin .

knowing how the woodlore's are made , what of , grind etc there is nothing but a name that seperates mine from theres , and a massive price tag of £400 - £600 i dont know how they justify them ?

even hand forges damascus or mosaic would not come in at that price .

i would want mosaic blade, walrus tusk or mamoth tooth handle with a world class sheath for that money !

each to there own i spose , but how do you dare ever use it ?

you wouldnt it would sit in a cabinet and collect dust :laugh:

Link to post
Share on other sites

yep went monday afternoon , do you live in south or north ireland ? postage was something like £8 or something if it was south so went for the cheaper version !!!

check has not cleared yet that only came monday to !

im haveing a bad week this week lots of things have gone tits up , all the wood for orders still has not arrived nor has the micarta etc for the other orders , i did a large cleaver for socks order yesterday and it cracked all over on quenching , and fell to bits when i was chopping stuff up with it !

i forged 5 up yeasterday so lets hope they come out ok today !!

might be good luck today we saw a pure black , blackbird , black eye lids beak feet everything , its a good or bad owmen i think ?

Link to post
Share on other sites

its no problem the guy in the postoffice had no idea what it was ha ha .

im sure it will be with you shortly , others in the uk have started to get theres .

i cant beleave its as expensive to post to southern ireland as it is to say america , thats crazy .

 

well gents the wood has arived , so its long day of handling bushcraft knives !!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By GruffaloGriff
      This is one my son has had on the go for a while. The wrought iron is a piece i pulled out of a skip, just thought it was mild steel rod, only realized when it was being forged into a pair of tongs. The tongs got abandoned and the wrought iron put to a better use. The blade is leaf spring from a series 2 landy.
      P1100998 by Terry Griffiths, on Flickr">P1100999 by Terry Griffiths, on Flickr">P1110001 by Terry Griffiths, on Flickr">
      Now Complete.
      Blade: Spring steel with satin finish and domed mirror polished spine. Length five and a half inches (145mm), width one and a half inches (38mm), thickness 3/16 (5mm).
      Handle: Utile handle scales on wrought iron frame with copper pins. Wrought iron fittings with copper spacers. Take down construction.
      P1110093 by Terry Griffiths, on Flickr">P1110099 by Terry Griffiths, on Flickr">P1110077 by Terry Griffiths, on Flickr">P1110078 by Terry Griffiths, on Flickr">P1110081 by Terry Griffiths, on Flickr">P1110082 by Terry Griffiths, on Flickr">P1110084 by Terry Griffiths, on Flickr">P1110085 by Terry Griffiths, on Flickr">P1110087 by Terry Griffiths, on Flickr">P1110090 by Terry Griffiths, on Flickr">P1110092 by Terry Griffiths, on Flickr">P1110094 by Terry Griffiths, on Flickr">P1110095 by Terry Griffiths, on Flickr">
    • By GruffaloGriff
      Recently finished this knife. I made it for a "knife in the hat" draw over on EM forum. 
      The style is Kiridashi so ground on one side only with the other flat like a chisel. Ideal for cutting leather or anything else where you would run the blade along a straight edge.
      [url=https://flic.kr/p/2kUct23][img]https://live.staticflickr.com/65535/51130166048_b5602b54f1_b.jpg[/img][/url][url=https://flic.kr/p/2kUct23]P1100987[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUh6oA][img]https://live.staticflickr.com/65535/51131068850_a16637af01_b.jpg[/img][/url][url=https://flic.kr/p/2kUh6oA]P1100984[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUbK34][img]https://live.staticflickr.com/65535/51130024819_a4fbe08087_b.jpg[/img][/url][url=https://flic.kr/p/2kUbK34]P1100990[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBjU][img]https://live.staticflickr.com/65535/51121609068_eb288c86f1_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBjU]P1100966[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLFC][img]https://live.staticflickr.com/65535/51121445434_5bd9c6806b_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLFC]P1100967[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTpafH][img]https://live.staticflickr.com/65535/51121131137_08baea8c3e_b.jpg[/img][/url][url=https://flic.kr/p/2kTpafH]P1100970[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLCr][img]https://live.staticflickr.com/65535/51121445249_39f4e8b177_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLCr]P1100971[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLAN][img]https://live.staticflickr.com/65535/51121445154_06c5c52abb_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLAN]P1100972[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBcK][img]https://live.staticflickr.com/65535/51121608653_cffd15b626_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBcK]P1100973[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTs5GT][img]https://live.staticflickr.com/65535/51121701171_4d40de442f_b.jpg[/img][/url][url=https://flic.kr/p/2kTs5GT]P1100974[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBa5][img]https://live.staticflickr.com/65535/51121608498_d007bc1e0d_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBa5]P1100976[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kMHVfX][img]https://live.staticflickr.com/65535/51056892207_85801fcab1_b.jpg[/img][/url][url=https://flic.kr/p/2kMHVfX]P1100912[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kN29jo][img]https://live.staticflickr.com/65535/51060253042_3cf9b1c874_b.jpg[/img][/url][url=https://flic.kr/p/2kN29jo]P1100921[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr








    • By GruffaloGriff
      This blade is made from motorbike chain hand forged on to a leaf spring core. I have experimented a few times with chain Damascus but this is the cleanest weld yet, not perfect but it has character. Very hard to eliminate all the voids in the chain beating it by hand...even though i spent probably half a day hammering away on it.... I will make a press one day.
      I had a smaller knife in mind when i started out but wanted to maximize the lump of rough forged "Damascus" I ended up with so it determined the size & shape of the final blank.
      The blade is 7.5 inches and handle  approx 4.5 so overall something like a 12" Knife.
      Handle is Scottish red stag and the bolster/ pommel are stacked brass & copper soldered together.
       
      P1100805 by Terry Griffiths, on Flickr">

      P1100849 by Terry Griffiths, on Flickr">P1100855 by Terry Griffiths, on Flickr">P1100847 by Terry Griffiths, on Flickr">P1100846 by Terry Griffiths, on Flickr">P1100853 by Terry Griffiths, on Flickr">P1100851 by Terry Griffiths, on Flickr">P1100845 by Terry Griffiths, on Flickr">P1100836 by Terry Griffiths, on Flickr">P1100844 by Terry Griffiths, on Flickr">P1100826 by Terry Griffiths, on Flickr">P1100823 by Terry Griffiths, on Flickr">
      P1100807 by Terry Griffiths, on Flickr">
    • By riohog
      kitchen knives and steak  knives   from bohler n690  and AEB-L stainless     red g10 handles with stainless pins 

    • By GruffaloGriff
      Heard a while back mention of sharpening with MDF wheels but never really paid much attention. I recently thought i would give it a go and turned up a quick MDF wheel on the face-plate of my wood-working lathe. I clamped a makeshift guide to the back of the lathe and worked with the wheel turning away from me. I was blown away by the results! Super sharp paper slicey edge straight off the wheel.
       
      Decided a dedicated MDF wheel sharpener was high on the list of must haves so started gathering bits. I was lucky enough to pick up an old 8" Makita bench grinder on ebay for £25. Everything else is made from scrap bits so that was all the outlay for the build.
       
      I took the guards off the grinder, swapped the switch and the power cable around so the on/off switch is effectively now on the back so the grinder can be operated with the wheels running away from you.
       
      The knife clamp is made from an old door hinge welded to a bit of rod off of some other power tool, hence the nice grippy knob on the end. A 6mm hex bolt through the hinge clamps the knife in place. A cutting of hex bar slides up and down to alter the angle of grind and locks in place with another allan bolt.
       
      Once set up to the desired angle the blade can be sharpened on both sides and both wheels quickly without altering anything.
       
      The MDF wheels are loaded with grey polishing compound and jewelers rouge respectively.
       
      P1100602 by Terry Griffiths, on Flickr">P1100612 by Terry Griffiths, on Flickr">P1100604 by Terry Griffiths, on Flickr">P1100605 by Terry Griffiths, on Flickr">P1100606 by Terry Griffiths, on Flickr">P1100608 by Terry Griffiths, on Flickr">P1100610 by Terry Griffiths, on Flickr">P1100611 by Terry Griffiths, on Flickr">

×
×
  • Create New...