Jump to content

every week at my forge and workshop(updated)


Recommended Posts


  • Replies 985
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

ok guys busy week here for me again . lst week mas production this week finnished knives of a slightly higher calibre ! first job of the week socks sent this knife for a refurb . bit of elbow g

Great work Matt, and knives that will last a lifetime with care. Remember lads this is Matts living, not a hobby. Try not to knock him down on price, the knives / blades are worth every penny, and m

boar knife not a true "how to" but just a little write up following the construction of a knife from a file to a "boar knife" i had a similar knife planned but after a pm from a hunting life member

Posted Images

ok guys busy week here for me again .

lst week mas production this week finnished knives of a slightly higher calibre !

first job of the week socks sent this knife for a refurb .

thisweek35_zpsf4d039c4.jpg

thisweek34_zpsea20a502.jpg

bit of elbow grease and some leather work later .

thisweek13_zps911c6d26.jpg

thisweek12_zpsa1fae951.jpg

the pitting is permanant so they had to stay where they are as the metal is thin as is , i did a wet form sheath with antique look .

 

 

then was on to this bushcrafter , its not full sized and would suit a smaller hand, lads/ ladies although it does fit in my hand and is safe , its very sharp and sports my own burl oak handles with brass pins and lanyard , with my take on a bushcraft sheath , articulated with brass hoop . all in all i love this knife that was once a file !

thisweek24_zps33e423ec.jpg

thisweek21_zps3348943d.jpg

thisweek23_zpsea35dbc7.jpg

thisweek22_zps38574918.jpg

 

that done i moved on to some damascus i forge weeks ago . its a 20 to 30 layer billet that i worked in two difgferant ways to get differant effects , first is this one .

iv not made a large knife for along time now and wanted something for seriouse hunting of larger game or camping bushcraft etc .

handle is green and black dymond wood which is laminated wood that is stabilised wih impregnated resin , water and shock proof and can not warp or move . the sheath is my fav today it has a 3x welt at the top which holds the blade in with out and clips etc , again articulated with brass hoop . the pattern is "whales throat camo" i just made that up ! straight laminate that i randomised , as you grind through the billet you expose another layer .

any way i really like this one to ! materials for the blade are 15n20 nickel steel and reclaimed steel from an antique two man wood saw blade i had .

thisweek30_zps118e5758.jpg

thisweek29_zps107eccd0.jpg

thisweek28_zps4ea6c1dc.jpg

thisweek27_zpsb43ddd30.jpg

thisweek31_zps496f29bb.jpg

thisweek25_zpsaae43f8e.jpg

then the next one started from the same billet , but i put 3 twists in it each one in the opposite direction to the last , the third is in the handle are and has exposed a star , handle is butterscotch buffalo horn and you can see the etched pattern under the scales . setting is burl oak board and silver birch burl , i want this one to go on ebay as a leter opener as i want to try new markets .

thisweek15_zps6e20853f.jpg

thisweek16_zps478cb81c.jpg

thisweek17_zps55bde0d3.jpg

thisweek18_zpsa80046f7.jpg

thisweek19_zpsb18398cb.jpg

thisweek20_zps5dd220ca.jpg

 

 

after that this was made for you guys .

thisweek37_zpsb0925095.jpg

thisweek_zps216c9e39.jpg

thisweek2_zps05591871.jpg

thisweek4_zpsd3a2f3d6.jpg

thisweek3_zps249ad73b.jpg

then there is reddawns miniature knife

to keep him legal the poaching c**t ha ha only pullin your p***er mate .

thisweek8_zps8ed9dc3f.jpg

thisweek7_zps6c2dafda.jpg

thisweek6_zps6073f9c8.jpg

thisweek5_zps0e2a4f58.jpg

i forghed this lot up for next week .

thisweek38_zps0e8bb54d.jpg

thisweek39_zps57928be3.jpg

and handled this

thisweek10_zpsb1066881.jpg

thisweek9_zps27e56628.jpg

 

and i still jhave this beauty for sale

thisweek33_zpsac55d65d.jpg

thisweek32_zpsb67917fd.jpg

thats about it for this week , i might get some more done tommorow afternoon .

all the best matt.

Brilliant as usual

Link to post
Share on other sites

me to dave !!

il have one last pop at selling it then if that does not work , il gift it to gemma she thinks its really nice !!

and thats good because when i met her she was all animal rights and almost vegan .

now she hunts her own dog , shoots and eats meet !!

so another knice knife in her collection might inspire her even more !! (she has damascus all sorts of knives iv made her now i think she has more than me !! 5ft tall and 7 stone very grily with a big bad ass knife collection and hunting bull terrier !

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By GruffaloGriff
      This is one my son has had on the go for a while. The wrought iron is a piece i pulled out of a skip, just thought it was mild steel rod, only realized when it was being forged into a pair of tongs. The tongs got abandoned and the wrought iron put to a better use. The blade is leaf spring from a series 2 landy.
      P1100998 by Terry Griffiths, on Flickr">P1100999 by Terry Griffiths, on Flickr">P1110001 by Terry Griffiths, on Flickr">
      Now Complete.
      Blade: Spring steel with satin finish and domed mirror polished spine. Length five and a half inches (145mm), width one and a half inches (38mm), thickness 3/16 (5mm).
      Handle: Utile handle scales on wrought iron frame with copper pins. Wrought iron fittings with copper spacers. Take down construction.
      P1110093 by Terry Griffiths, on Flickr">P1110099 by Terry Griffiths, on Flickr">P1110077 by Terry Griffiths, on Flickr">P1110078 by Terry Griffiths, on Flickr">P1110081 by Terry Griffiths, on Flickr">P1110082 by Terry Griffiths, on Flickr">P1110084 by Terry Griffiths, on Flickr">P1110085 by Terry Griffiths, on Flickr">P1110087 by Terry Griffiths, on Flickr">P1110090 by Terry Griffiths, on Flickr">P1110092 by Terry Griffiths, on Flickr">P1110094 by Terry Griffiths, on Flickr">P1110095 by Terry Griffiths, on Flickr">
    • By GruffaloGriff
      Recently finished this knife. I made it for a "knife in the hat" draw over on EM forum. 
      The style is Kiridashi so ground on one side only with the other flat like a chisel. Ideal for cutting leather or anything else where you would run the blade along a straight edge.
      [url=https://flic.kr/p/2kUct23][img]https://live.staticflickr.com/65535/51130166048_b5602b54f1_b.jpg[/img][/url][url=https://flic.kr/p/2kUct23]P1100987[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUh6oA][img]https://live.staticflickr.com/65535/51131068850_a16637af01_b.jpg[/img][/url][url=https://flic.kr/p/2kUh6oA]P1100984[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kUbK34][img]https://live.staticflickr.com/65535/51130024819_a4fbe08087_b.jpg[/img][/url][url=https://flic.kr/p/2kUbK34]P1100990[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBjU][img]https://live.staticflickr.com/65535/51121609068_eb288c86f1_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBjU]P1100966[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLFC][img]https://live.staticflickr.com/65535/51121445434_5bd9c6806b_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLFC]P1100967[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTpafH][img]https://live.staticflickr.com/65535/51121131137_08baea8c3e_b.jpg[/img][/url][url=https://flic.kr/p/2kTpafH]P1100970[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLCr][img]https://live.staticflickr.com/65535/51121445249_39f4e8b177_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLCr]P1100971[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTqLAN][img]https://live.staticflickr.com/65535/51121445154_06c5c52abb_b.jpg[/img][/url][url=https://flic.kr/p/2kTqLAN]P1100972[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBcK][img]https://live.staticflickr.com/65535/51121608653_cffd15b626_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBcK]P1100973[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTs5GT][img]https://live.staticflickr.com/65535/51121701171_4d40de442f_b.jpg[/img][/url][url=https://flic.kr/p/2kTs5GT]P1100974[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kTrBa5][img]https://live.staticflickr.com/65535/51121608498_d007bc1e0d_b.jpg[/img][/url][url=https://flic.kr/p/2kTrBa5]P1100976[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kMHVfX][img]https://live.staticflickr.com/65535/51056892207_85801fcab1_b.jpg[/img][/url][url=https://flic.kr/p/2kMHVfX]P1100912[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr
      [url=https://flic.kr/p/2kN29jo][img]https://live.staticflickr.com/65535/51060253042_3cf9b1c874_b.jpg[/img][/url][url=https://flic.kr/p/2kN29jo]P1100921[/url] by [url=https://www.flickr.com/photos/154623046@N06/]Terry Griffiths[/url], on Flickr








    • By GruffaloGriff
      This blade is made from motorbike chain hand forged on to a leaf spring core. I have experimented a few times with chain Damascus but this is the cleanest weld yet, not perfect but it has character. Very hard to eliminate all the voids in the chain beating it by hand...even though i spent probably half a day hammering away on it.... I will make a press one day.
      I had a smaller knife in mind when i started out but wanted to maximize the lump of rough forged "Damascus" I ended up with so it determined the size & shape of the final blank.
      The blade is 7.5 inches and handle  approx 4.5 so overall something like a 12" Knife.
      Handle is Scottish red stag and the bolster/ pommel are stacked brass & copper soldered together.
       
      P1100805 by Terry Griffiths, on Flickr">

      P1100849 by Terry Griffiths, on Flickr">P1100855 by Terry Griffiths, on Flickr">P1100847 by Terry Griffiths, on Flickr">P1100846 by Terry Griffiths, on Flickr">P1100853 by Terry Griffiths, on Flickr">P1100851 by Terry Griffiths, on Flickr">P1100845 by Terry Griffiths, on Flickr">P1100836 by Terry Griffiths, on Flickr">P1100844 by Terry Griffiths, on Flickr">P1100826 by Terry Griffiths, on Flickr">P1100823 by Terry Griffiths, on Flickr">
      P1100807 by Terry Griffiths, on Flickr">
    • By riohog
      kitchen knives and steak  knives   from bohler n690  and AEB-L stainless     red g10 handles with stainless pins 

    • By GruffaloGriff
      Heard a while back mention of sharpening with MDF wheels but never really paid much attention. I recently thought i would give it a go and turned up a quick MDF wheel on the face-plate of my wood-working lathe. I clamped a makeshift guide to the back of the lathe and worked with the wheel turning away from me. I was blown away by the results! Super sharp paper slicey edge straight off the wheel.
       
      Decided a dedicated MDF wheel sharpener was high on the list of must haves so started gathering bits. I was lucky enough to pick up an old 8" Makita bench grinder on ebay for £25. Everything else is made from scrap bits so that was all the outlay for the build.
       
      I took the guards off the grinder, swapped the switch and the power cable around so the on/off switch is effectively now on the back so the grinder can be operated with the wheels running away from you.
       
      The knife clamp is made from an old door hinge welded to a bit of rod off of some other power tool, hence the nice grippy knob on the end. A 6mm hex bolt through the hinge clamps the knife in place. A cutting of hex bar slides up and down to alter the angle of grind and locks in place with another allan bolt.
       
      Once set up to the desired angle the blade can be sharpened on both sides and both wheels quickly without altering anything.
       
      The MDF wheels are loaded with grey polishing compound and jewelers rouge respectively.
       
      P1100602 by Terry Griffiths, on Flickr">P1100612 by Terry Griffiths, on Flickr">P1100604 by Terry Griffiths, on Flickr">P1100605 by Terry Griffiths, on Flickr">P1100606 by Terry Griffiths, on Flickr">P1100608 by Terry Griffiths, on Flickr">P1100610 by Terry Griffiths, on Flickr">P1100611 by Terry Griffiths, on Flickr">

×
×
  • Create New...