Spyro 1 Posted October 31, 2011 Report Share Posted October 31, 2011 To the HW35? Needs a good clean (no idea...) and as yet has no pellets - but im a complete newbie so simple jargon please!! (bought it years ago and just found it in the garage.) Just looking to get it clean and take out some targets before we eventually get rid of some rabbits. Quote Link to post
Spyro 1 Posted November 1, 2011 Author Report Share Posted November 1, 2011 Anyone? Quote Link to post
secretagentmole 1,701 Posted November 1, 2011 Report Share Posted November 1, 2011 (edited) My idiots guide would be, clean rust off the action with tinfoil and oil. Then take gun as a whole to a gunsmith who specialises in air weapons and say, "Service this please!". A decent gun deserves respectful treatment! You will probably need new seals at the least. Where in the country are you? Edited November 1, 2011 by secretagentmole Quote Link to post
markha 99 Posted November 1, 2011 Report Share Posted November 1, 2011 Take to stock off then spray the whole thing in WD40 and give it a good wipe over with a beer mat. Have a look down the barrel and see if its rusted, do not put any oil or WD40 down there. Go to gun shop - buy tin of pellets. Fire a load through the gun at a safe target in your garden. See how its grouping. Putting some lead down the barrel wil start to clean out any rust. Just give the outside a clean off first, dont worry about seals etc just yet as its made by HW and the internals may well be in very good condition even if its been in the garage for a while. Quote Link to post
Spyro 1 Posted November 4, 2011 Author Report Share Posted November 4, 2011 (edited) You will probably need new seals at the least. Where in the country are you? Im in Dorset, between the new forest and the sea! Thanks, i pass a gun shop on my way to work sometimes so i'll hop in there and see what they can do for it! Edited November 4, 2011 by Spyro Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.