Jump to content
Sign in to follow this  
Marksman

A & M Custom Gunsmiths HW100 Custom Aluminium Cylinder

Recommended Posts

Here we have the new and improved customised quickfill aluminium cylinders by A & M Custom Gunsmiths for the Weihrauch HW100 series.

 

They have been improved in design being made from one piece billet aluminium allowing for more airspace giving a higher shot count.Also mimicking the original HW cylinder it is fitted with an onboard accurate pressure gauge.

Both myself and wor kid done some testing over the last weekend and in .22cal on a 200bar fill we returned a healthy 110 shots with 120bar left in the cylinder so we're estimating around the 200 shot mark as it starts coming off the reg at 90bar

raising the shot count to an estimated 180-190 if not more.

 

Obviously being made from aluminium the new cylinders are considerably lighter than the stock stainless ones with the weights and dimensions shown in the following video....

 

http://www.youtube.com/watch?v=ibczBKXY8g4&hd=1

 

The difference to the actual weight and balance of the rifle once it's fitted is amazing. So those that complain about the weight of the HW100 and avoid buying one for that reason can now look at this in a new light.

 

Each cylinder comes with its own fill probe and is backed by the the usual full 100% guaranteed satisfaction & customer service from A & M Custom Gunsmiths.

Available in both Karbine and rifle lengths I can offer these new cylinders at the price of £140 each inc P&P

 

Anyone who would like one please contact me via email/PM

 

cheers

 

Darryl

Edited by Marksman
  • Like 1

Share this post


Link to post
Share on other sites

Estimations and small tests are saying double the shot count of standard cylinder, but this will depend on the rifle power and pellet weight

 

Darryl

Share this post


Link to post
Share on other sites

Hi Tony

 

I'll be testing the shot count for the .177 standard length tomorrow and will be posting the results up as soon as I have them, going off the .22 standard custom cylinder the shot count is approx double that of the standard HW one

 

Darryl

Share this post


Link to post
Share on other sites

ive told my mate about these and hes very interested in the shot count of a 177 karbine?

chris

Share this post


Link to post
Share on other sites
ive told my mate about these and hes very interested in the shot count of a 177 karbine?

chris

 

Tested the standard size yesterday in .177 and on a full 200bar charge we returned 153 useable shots using AAF 8.4gr before any POI shift so is estimate it at being around the 120-130 mark

Darryl

Share this post


Link to post
Share on other sites

will this result in the old mk1 problem where the screw thread was aliminium and the bottle was steel and kept striping the thread and all had to be recalled and steel incert fitted worried this will go the other way. bazz41

Share this post


Link to post
Share on other sites

No because these are quickfill and dont need to be removed once fitted, unlike the mk1 where the cylinder needed to be removed for filling

 

Darryl

Share this post


Link to post
Share on other sites
Hi Darryl will you be testing the .22 karbine???

 

Cheers chris

 

Expectation is 130+ shots in .22 mate

I've not got a carbine to test it on but others using the same have had an average of double the shot count of the standard cylinder

 

 

Darryl

Share this post


Link to post
Share on other sites

Here's the carbine shot count in .22

 

 

ONly carbine cylinders left for now!!

 

Darryl

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By scotfalconer
      View Advert Harkila pro hunter x jacket
      Harkila pro hunter x  jacket euro size 52, uk size L, green, unwanted gift, receipt as proof of purchase,purchase December 2017, mint condition , & p&p
      Advertiser scotfalconer Date 10/03/18 Price £375.00 Category Clothing and Footwear  
    • By TRAV
      MK1 FERRET FINDER DEBEN 15ft LOCATER AND COLLAR
      View Advert hi i haveca mk1 ferret finder and collar like new in good working order 
      Advertiser TRAV Date 30/01/18 Price   Category Ferreting Equipment  
    • By TRAV
      MK1 15ft FERRET COLLARS X2
      View Advert 2x 15ft full working order, excellent condition mk1 ferret finder collars. 
      Advertiser TRAV Date 21/01/18 Price  50 for the two   Category Ferreting Equipment  
    • By The Field Hunter
      In excellent condition 
      comes with AGS 3x9 x40 Fith Gen Elite Scope and original box with silencer 
      Wanting £250 
      Collect from Lancashire 






    • By Lamper121
      FOR SALE: 
      Weihrauch HW95K .177 in immaculate condition. I bought this rifle for my Son's birthday in summer however since then we have got a rimfire and it has not been touched. I have not modified or dismantled the gun at all. I have maintained in with the appropriate cleaners and pull through and it has been stored well. 
      In addition to the rifle I include some 1" scope mounts/rings, they aren't any fancy brand but they did the trick with the Hawke 3-9x50 I had on the rifle. 
      Finally I include a nearly full tin of H&N FTT's which in my experience the rifle loves as well as a pull through. 
      I'd like £220 for the lot. I'm Located near Malton in North Yorkshire however I'm willing to travel a short distance to meet a buyer if it helps. 
      PM me if interested, thanks. 
       
       
       
       
       
       












×