rusa 0 Posted May 24, 2011 Report Share Posted May 24, 2011 To Mr_Logic I read your posts because I have a Coyote Lite 243W too and I have the same problems you wrote. Did uou find the solution to shooting well and can you suggest me, or I sell my gun? Quote Link to post
Mr_Logic 5 Posted May 24, 2011 Author Report Share Posted May 24, 2011 I sold mine and bought a Howa instead. That shot really well with 95gr Hornady SSTs over 46gr H4831SC. You could try some OAL experimentation but personally I think you'll do better with a new rifle or a new barrel. Quote Link to post
jamie g 17 Posted May 24, 2011 Report Share Posted May 24, 2011 i would go have the crown checked and have it re done before selling Quote Link to post
matt_hooks 188 Posted May 24, 2011 Report Share Posted May 24, 2011 Holy thread resurrection Batman! I would also suggest the usual, get the crowning checked and recut, check all stock screws are correctly tensioned, consider bedding the action. Check that the barrel is either free floating, or is properly supported depending on the design. Quote Link to post
rusa 0 Posted May 26, 2011 Report Share Posted May 26, 2011 Holy thread resurrection Batman! I would also suggest the usual, get the crowning checked and recut, check all stock screws are correctly tensioned, consider bedding the action. Check that the barrel is either free floating, or is properly supported depending on the design. Thank you for your suggest. I think my new street will be to sell it, in a near future. Our experience are to much similar... To Jamie g: attached is the crown, I think it's not necessary to re-cut, or not? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.