[Green light.]

Red, green, Amber I have used them all my favourite was red, but only use NV now and a thermal spotter 

[Reg gauge]

Fitted a gauge it is showing 70bar on it, what are your thoughts to low to high ? It a .177 

[Reg gauge]

8 hours ago, pav said:

When I bought the amp reg I stripped and resealed and set it to 100 bar and its spot on iv been using it for rats stick a gauge on and see what regs Set at and adjuster in back for hammerspring make sure that's not winding itself out

Hi Pav mine will shoot 11.2 to 11.9 which is a bit close to being hot, have had to re-set the pellet probe, put a new hammer in aswell, that's why I was asking about the ratworks gauge so I can see if it has reg creep, got a new seal kit, once I have fitted a gauge I will have I better idea

[Reg gauge]

2 hours ago, pav said:

My mk2 (well bought it for grandson) came with lane reg in but wanted it back to standard so put amp reg in just so it can be adjusted without taking it apart

How does it shoot? Mine has got worse with the original reg in, had it on the cronograph a couple of weeks ago and it was deviating by 45 fps so have decided to put a new reg in. 

[Reg gauge]

1 hour ago, pav said:

I don't know I just have fx guns and was going to put reg gauge on my wildcat and thought the impact gauge looked a little big when I put both gauges up against stock

Yeah I don't want anything to big I think it will look out of place, saw the ratworks one and it looks like the huma reg and that looks OK, so you have a wildcat aswell, can I ask if you have fitted a new reg in yours I think I will be fitting one in mine, no sure if to go for huma or a lane reg.

[Reg gauge]

12 minutes ago, pav said:

1/8 bsp thread the crown uses a 25.4mm gauge but impact a 28mm so you can use either but you will have to cut slot bigger the 25mm will probably be better

Cheers but do you no if the ratworks would be sutible 

[Reg gauge]

I am after fitting a reg gauge to my wildcat mk2 in the bleed off plug I no you can get a huma one but was looking at a ratworks one but there is no size for it on there site can anybody help, with thread and face size or can  recommend another one with 10bar increments

[Newbie advice for longlead (slip)]

Harness in my opinion will only teach a dog at that age to pull, soft toy on a lengh of soft string works well, spin it around you, drag it along make it a game, let the pup catch it from time to time but Don't snatch it out the pups mouth, (soft string then it will snap and not cause any harm to the pups mouth if you snatch it by mistake)

[Thermal spotter recommendations]

Pulsar axion xm30f will be coming out in March looks good I will be waiting for that 

[Best price action key xm30]

Has title says where the best deals to be had

[Enforcer decoys]

Yes thanks mate 

[New perm]

Think he's coming round I have been shooting over the standing crops  proberley he was a bit wary with be being new you have to gain their trust how it's come when ever you like if I see your car I no you are around happy days

 

 

 

[Enforcer decoys]

I am after some enforcer flying decoys anybody no of any where I can get some, every where I have tried are out of stock 

[Combro cb 625 mk4 crono]

Good piece of kit Combro have their own web site which I brought mine from 3 months ago

[Wildcat mk2]

You are not going to run out for a while 

[Wildcat mk2]

the safety catch will only engage if the fx wildcat mk 2 is loaded I have found, I just use that to see weather it is loaded or not, just ordered 2 tins of the Hades to try 

[New perm]

That's what I thought, not a problem I will wait until it's cut, i think I will have to get stocked up with ammo I think it's going to be a few good days shooting.

[New perm]

I picked up a new permission a couple of months ago but the farmer does not want any shooting over standing crops he said that it to do with the lead shot contaminating the crops as when the corn is being process the metal detectors don't pick lead up, not heard this one before can any body clarify this ??? or is it just the people who as the corn off him

[Quietest PCP air rifle]

One that you don't shoot 

[Permission in writing, is it needed for shooting rabbits with air rifle]

Same as SB not got anything down in writing just get on with it, been out shooting loads of time when plod have turned up, they only turn up because some bunny cuddler have rang them.

[BSA meteor mk2]

Finally got some decent pellets and chroned the old girl rws superdomes 14.5 gr average flb was 10.284 over the moon with that and a close second was some accupell 14.3 gr average flb was 9.998 which a chap at work gave me.

[NEW TOY]

16 minutes ago, Phill-W68 said:

I've already got 3 spare mags got them from eaglevision, couple of weeks ago after a couple on here recommended them, they look superb very well made, just not time to play with he wildcat yet nevermind the mags

It will be worth the wait 

 

17 minutes ago, Phill-W68 said:

I've already got 3 spare mags got them from eaglevision, couple of weeks ago after a couple on here recommended them, they look superb very well made, just not time to play with he wildcat yet nevermind the mags

 

[NEW TOY]

Enjoy mate I have it 177 and it shoots like a dream get yourself a couple more mags and you will be well away , yeah the mk3 might have a bigger mag but in my eyes that the only thing going for it, power adjuster mean you have to keep zeroing it in unless you put a pard 008 on and set the ABCDE for diffrent power out puts 

[BSA meteor mk2]

Will do has soon as I get the pellets it is a 22, I only have 177 for the wildcat, been told rws superdomes work well in them ?

[BSA meteor mk2]

Stripped it down again and. Found the top hat which was recommend had smashed into 4 pieces, so rebuilt and fired a few shots to get rid of the dieseling, chroned again and was getting any where from 5flb to 10 flb but only had a few pellets left but they were a mixed bag from a mate, so I have ordered some pellets so will retest as so has i can if it is still up and down on flb I will fit a new type piston head.