Jump to content
bigmac 97kt

A Nother One For The Kids

Recommended Posts

Get this photon sorted in the next few weeks first

 

then its a hw77 or a hw97k

 

going to sort the action out silver and do the stock dark dark walnut

 

but this one or both is going to be for my self for a change

 

full tune and a vortex piston seal just to see what all the fuss is about lol

 

im looking forward to it

 

atvbjimmy :thumbs: :thumbs: :thumbs:

Share this post


Link to post

Did you do any work on the trigger of that hawke?

I have a vukcan I have rebuilt and it needs something doing with the trigger.

I have heard about pen springs and polishing.

  • Like 1

Share this post


Link to post

Gary sorry for the delay on the rifle mate but iv had to order a few parts for it

 

mainly the safety ,as with out this iv had to tighten the grub screw that holds the trigger spring in place and allows you to slacken or tighten the tension on the trigger and as she is now i dont think the kids would be able to use it,

 

ok for an adult mind as the trigger is hard to squeeze off the way she is

 

and if i lighten the spring tension it will go off on its own or when you put the barrel back in place .

 

no good if kids are going to use it .

 

ill get there with her in the end lol :laugh:

 

atvbjimmy :thumbs: :thumbs: :thumbs:

Share this post


Link to post

Gary sorry for the delay on the rifle mate but iv had to order a few parts for it

 

mainly the safety ,as with out this iv had to tighten the grub screw that holds the trigger spring in place and allows you to slacken or tighten the tension on the trigger and as she is now i dont think the kids would be able to use it,

 

ok for an adult mind as the trigger is hard to squeeze off the way she is

 

and if i lighten the spring tension it will go off on its own or when you put the barrel back in place .

 

no good if kids are going to use it .

 

ill get there with her in the end lol :laugh:

 

atvbjimmy :thumbs: :thumbs: :thumbs:

I've said several times, don't trouble yourself......I'm just grateful for all the work you're putting into this project - take as long as you need, mate.

  • Like 1

Share this post


Link to post

 

Gary sorry for the delay on the rifle mate but iv had to order a few parts for it

 

mainly the safety ,as with out this iv had to tighten the grub screw that holds the trigger spring in place and allows you to slacken or tighten the tension on the trigger and as she is now i dont think the kids would be able to use it,

 

ok for an adult mind as the trigger is hard to squeeze off the way she is

 

and if i lighten the spring tension it will go off on its own or when you put the barrel back in place .

 

no good if kids are going to use it .

 

ill get there with her in the end lol :laugh:

 

atvbjimmy :thumbs: :thumbs: :thumbs:

I've said several times, don't trouble yourself......I'm just grateful for all the work you're putting into this project - take as long as you need, mate.

 

NOT FOR GOT ABOUT IT GARY

 

got the front site and the rear site for her the other day fitted the front but need to do a little work on the rear as its not the right one for her but ill trim it down and get it to sit flat on its mount .

 

Me and Si had a cracking time with it the other day when he was at mine smashing wine bottles and hitting tin cans with her lol

 

Im going to leave the sites black as it complements the silver action and sets the rifle off

 

and im leaving the scopes on for you

 

still waiting for the safety for it but once i get that fitted and the bis adjustable but pad she will be off down to you bud .

 

iv got to say she looks the dogs Bo****cks

 

stunning just stunning ,

 

to tell you the truth i think the kids will not get a chance to use it for you adults lol :laugh: :laugh: :laugh:

 

atvbjimmy :thumbs: :thumbs: :thumbs:

post-63400-0-96939200-1509397540_thumb.jpg

post-63400-0-45274300-1509397555_thumb.jpg

post-63400-0-24602200-1509397570_thumb.jpg

post-63400-0-19077900-1509397587_thumb.jpg

post-63400-0-40216700-1509397602_thumb.jpg

Share this post


Link to post

That is

 

 

Gary sorry for the delay on the rifle mate but iv had to order a few parts for it

 

mainly the safety ,as with out this iv had to tighten the grub screw that holds the trigger spring in place and allows you to slacken or tighten the tension on the trigger and as she is now i dont think the kids would be able to use it,

 

ok for an adult mind as the trigger is hard to squeeze off the way she is

 

and if i lighten the spring tension it will go off on its own or when you put the barrel back in place .

 

no good if kids are going to use it .

 

ill get there with her in the end lol :laugh:

 

atvbjimmy :thumbs: :thumbs: :thumbs:

 

I've said several times, don't trouble yourself......I'm just grateful for all the work you're putting into this project - take as long as you need, mate.

NOT FOR GOT ABOUT IT GARY

 

got the front site and the rear site for her the other day fitted the front but need to do a little work on the rear as its not the right one for her but ill trim it down and get it to sit flat on its mount .

 

Me and Si had a cracking time with it the other day when he was at mine smashing wine bottles and hitting tin cans with her lol

 

Im going to leave the sites black as it complements the silver action and sets the rifle off

 

and im leaving the scopes on for you

 

still waiting for the safety for it but once i get that fitted and the bis adjustable but pad she will be off down to you bud .

 

iv got to say she looks the dogs Bo****cks

 

stunning just stunning ,

 

to tell you the truth i think the kids will not get a chance to use it for you adults lol :laugh: :laugh: :laugh:

 

atvbjimmy :thumbs: :thumbs: :thumbs:

 

 

 

All I can say is WOW !

 

I'm going to have a long queue for this baby..... Stunning work, Jimmy !

  • Like 1

Share this post


Link to post

Right fitted the rear site just about

 

had to take it apart as one of the fitting screws sits under the mechanism of the site

 

got it on on one side but need to remove the grub screw that holds the barrel in place as this is a rifle that comes with a 177 and a 22 barrel so you can interchange them but as i do not have the 177 barrel im going to remove the grub screw and fit a aln screw to hold the site and the barrel in place as the two screw holes on the site line up nicely with the grub screw hole and one of the original screw holes at the rear .

 

atvbjimmy :thumbs: :thumbs: :thumbs:

post-63400-0-73030500-1509482727_thumb.jpg

post-63400-0-21085500-1509482743_thumb.jpg

post-63400-0-97187200-1509482767_thumb.jpg

post-63400-0-49043200-1509482777_thumb.jpg

Share this post


Link to post

Jimmy I'm 95% sure I've got the plastic piston rings for the hawk I just put 'O'rings on I think and with it been the mk2 and interchangeable barrel someone may have the 177 barrel laid doing nothing and kindly donate it to you for the gun club . If your needing the sites sooner I'll post them up to you anyway I'll I send them up straight away I've just remembered where they are

Thanks mark

im supprised you can find anything in youre garage mark , theres that much stuff lol, atb moe.
  • Like 1

Share this post


Link to post

 

Jimmy I'm 95% sure I've got the plastic piston rings for the hawk I just put 'O'rings on I think and with it been the mk2 and interchangeable barrel someone may have the 177 barrel laid doing nothing and kindly donate it to you for the gun club . If your needing the sites sooner I'll post them up to you anyway I'll I send them up straight away I've just remembered where they are

Thanks mark

im supprised you can find anything in youre garage mark , theres that much stuff lol, atb moe.

 

Your not kidding Moe lol

 

Funny thing is he knows where every thing is last time i was at his he gave me the rifles and all the parts were scattered all around his garage ,,,,under things on top of gear,,,and all four corners of the garage lol

 

BUT he went strait to them .

 

AN ORGANIZED MESS ,,,EVERY THING IN ITS PLACE AND A PLACE FOR EVERY THING

 

HE SAY,S ,

 

ATVBJIMMY :thumbs: :thumbs: :thumbs:

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×