Putange Trouble Shooting

[postie 423]

I recently bought 20 putanges from Norfolk trapper. I've had a fair bit of success with them but I've had a couple of problems.

 

Firstly while playing with them I managed to somehow bend the setting tool forks. I managed to straighten them out but I thought the setting tool was a bit flimsy. I've now bought the pliers which seem to be a lot better.

 

Secondly...out of the 20 traps I can't seem to set 3 of them. When I open them out the jaws are twisting making it impossible to set the trigger. I can set the others no problem so I don't think I'm doing anything wrong. Anybody else had this problem, if so have you any solutions!!!

 

Cheers postie

[tilimangro 1,013]

Yes

The tools are flimsy

I put a metal rod up the gap in tool so they can't bend

You can bend the putange back that has twisted

I did it with the setting tool handle

 

Essentially you want to bend the twist over it self

Edited to add hope that makes sense feel free to pm me

[smithie 2,424]

postie i have a spare setting tool if you want one. its thicker than the one made in france..

 

just p.m a postal address

[LuckOrJudgement 437]

I had a putang went like that. Tried tinkering, bending this way and that with no joy. If they're new, get em exchanged

[LuckOrJudgement 437]

I hardened off my tool by heating it up with a gas torch then plunging into cold water - worked a treat.

[postie 423]

Thanks for the replies lads...

 

tilimangro...good tip mate, I got the claw hammer on them and gave them a tweak...they're working a treat now thanks.

 

Smithie...I'll send you a pm mate