Jump to content


Photo
- - - - -

Advice From .222 Shooters


  • Please log in to reply
57 replies to this topic

#31 belly47

belly47

    Born Hunter

  • Members
  • PipPipPip
  • 79 posts
  • Location:rochester

Posted 30 July 2017 - 11:01 am

I went to the game fair yesterday and didn't see anything great in .222 will need to keep checking on gun trader or bite the proverbial bullet and vary licence for .223

#32 charlie caller

charlie caller

    Triple Two Fan

  • Donator
  • 5,237 posts
  • Location:England

Posted 02 August 2017 - 04:41 pm

Dont do it, stick with .222 something will come along, have you tried guntrader?



#33 belly47

belly47

    Born Hunter

  • Members
  • PipPipPip
  • 79 posts
  • Location:rochester

Posted 03 August 2017 - 04:49 am

I've got a tikka T3X lite on it's way to me next week!

Will let you know how I get on with it
  • charlie caller and walshie like this

#34 Underdog

Underdog

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,193 posts
  • Location:England, Staffordshire.

Posted 03 August 2017 - 04:52 am

I've got a tikka T3X lite on it's way to me next week!

Will let you know how I get on with it

Wise choice sir ☺️
  • charlie caller likes this

#35 belly47

belly47

    Born Hunter

  • Members
  • PipPipPip
  • 79 posts
  • Location:rochester

Posted 03 August 2017 - 04:56 am

I've got a tikka T3X lite on it's way to me next week!

Will let you know how I get on with it

Wise choice sir ☺️

thanks U

want to pick your brains with regards cleaning if I may as it will be my first centre fire .

what products to use? and what cleaning regime to use?

I have rimfires and have never cleaned the bores only give the barrel and action a wipe over with oil rag.

what would you suggest ?

#36 Underdog

Underdog

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,193 posts
  • Location:England, Staffordshire.

Posted 03 August 2017 - 05:26 am

If your tikka barrel is like mine was it won't need much cleaning!

The big concern is moisture, like bringing a cold rifle into home and condensation forms on it and the bore.
I run a loose patch through to remove any damp fouling after a few hours. As you know, there is no coating of bullet lube protecting the bore like a rim fire.

If there is a moderator store it muzzle down. Moderator's are water traps, from the combustion and rarely get hot enough to vape off.

I like the Forrest foam for cleaning the bore of copper fouling.

Externally I use my black powder patch lube. Candle wax and olive oil mixed together, nothing rusts coated in that.

U.

#37 belly47

belly47

    Born Hunter

  • Members
  • PipPipPip
  • 79 posts
  • Location:rochester

Posted 03 August 2017 - 05:48 am

If your tikka barrel is like mine was it won't need much cleaning!

The big concern is moisture, like bringing a cold rifle into home and condensation forms on it and the bore.
I run a loose patch through to remove any damp fouling after a few hours. As you know, there is no coating of bullet lube protecting the bore like a rim fire.

If there is a moderator store it muzzle down. Moderator's are water traps, from the combustion and rarely get hot enough to vape off.

I like the Forrest foam for cleaning the bore of copper fouling.

Externally I use my black powder patch lube. Candle wax and olive oil mixed together, nothing rusts coated in that.

U.


thanks for the advice

#38 charlie caller

charlie caller

    Triple Two Fan

  • Donator
  • 5,237 posts
  • Location:England

Posted 03 August 2017 - 04:38 pm

.222 wont need a great deal of cleaning, Tikka are an excellent rifle, well done, as Underdog says forest foam is good, just make sure you get a quality rod and brush, I would aim to clean it every 150 rounds or so, but I would not get overly worried about it, more rifles are ruined by over enthusiastic cleaning than anything else, my mates has not been cleaned for 10 years and it shoots half inch groups @ 175 yards. I would make sure whatever you do remove the moderator after every use, not doing so is the quickest way to rot the crown and bore on your rifle, I remove the mod every time on my .243 and it never loses zero, time after time, enjoy the .222 mate.



#39 belly47

belly47

    Born Hunter

  • Members
  • PipPipPip
  • 79 posts
  • Location:rochester

Posted 03 August 2017 - 04:59 pm

.222 wont need a great deal of cleaning, Tikka are an excellent rifle, well done, as Underdog says forest foam is good, just make sure you get a quality rod and brush, I would aim to clean it every 150 rounds or so, but I would not get overly worried about it, more rifles are ruined by over enthusiastic cleaning than anything else, my mates has not been cleaned for 10 years and it shoots half inch groups @ 175 yards. I would make sure whatever you do remove the moderator after every use, not doing so is the quickest way to rot the crown and bore on your rifle, I remove the mod every time on my .243 and it never loses zero, time after time, enjoy the .222 mate.



👍

#40 PLEDGEY

PLEDGEY

    Mega Hunter

  • Donator
  • 587 posts
  • Location:Somerset.

Posted 03 August 2017 - 09:03 pm

If your tikka barrel is like mine was it won't need much cleaning!

The big concern is moisture, like bringing a cold rifle into home and condensation forms on it and the bore.
I run a loose patch through to remove any damp fouling after a few hours. As you know, there is no coating of bullet lube protecting the bore like a rim fire.

If there is a moderator store it muzzle down. Moderator's are water traps, from the combustion and rarely get hot enough to vape off.

I like the Forrest foam for cleaning the bore of copper fouling.

Externally I use my black powder patch lube. Candle wax and olive oil mixed together, nothing rusts coated in that.

U.

I always keep 3 or 4 of the Napier pads in the cabinet. Got that VP90 stuff in them that stops rust and corrosion.http://www.napieruk....itor-VP90_.html http://www.napieruk....itor-VP90_.html Don't know if it's all BS but I've never had any problems while I've been using them.



#41 Underdog

Underdog

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,193 posts
  • Location:England, Staffordshire.

Posted 03 August 2017 - 09:40 pm


If your tikka barrel is like mine was it won't need much cleaning!

The big concern is moisture, like bringing a cold rifle into home and condensation forms on it and the bore.
I run a loose patch through to remove any damp fouling after a few hours. As you know, there is no coating of bullet lube protecting the bore like a rim fire.

If there is a moderator store it muzzle down. Moderator's are water traps, from the combustion and rarely get hot enough to vape off.

I like the Forrest foam for cleaning the bore of copper fouling.

Externally I use my black powder patch lube. Candle wax and olive oil mixed together, nothing rusts coated in that.

U.

I always keep 3 or 4 of the Napier pads in the cabinet. Got that VP90 stuff in them that stops rust and corrosion.http://www.napieruk....itor-VP90_.html http://www.napieruk....itor-VP90_.html Don't know if it's all BS but I've never had any problems while I've been using them.
Have heard they work well myself.

I always wanted to fit a 12v bulb in my cabinet to created a gentle heat but never got around to it.

#42 David.evans

David.evans

    4 warning points

  • Donator
  • 3,807 posts
  • Location:Birmingham

Posted 03 August 2017 - 10:44 pm

Sorry to jump on this , but would you take of the mod on 17 / 22 befor putting away ?
Atb

#43 charlie caller

charlie caller

    Triple Two Fan

  • Donator
  • 5,237 posts
  • Location:England

Posted 03 August 2017 - 10:48 pm

No a .22 or .17 hmr dont produce the kind of corrosive crap and moisture that a centerfire does.


  • David.evans likes this

#44 Underdog

Underdog

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,193 posts
  • Location:England, Staffordshire.

Posted 04 August 2017 - 05:35 am

No a .22 or .17 hmr dont produce the kind of corrosive crap and moisture that a centerfire does.

Not quite buddy.

22 LR bullets are externally externally lubricated.
That lubricant coats the bore and protects from moisture.

Jacketed bullets don't carry lubricant so the bore is left dry except the fouling/ spot is hygroscopic. It absorbs moisture and that's what causes damage.

The moderator acts as a decompression chamber, the rapid decompression allows water vapour (present from combustion) to condense rapidly and so water drops can form in a mod.
Without and lubricant coating the muzzle and bore water from the mod can enter the bore.
This can happen on any rifle from LR up but the more powder burned the more potential for water released, the good news though is that the more powder burned the more heat is produced and often the water is vaporised off.

I.
  • David.evans likes this

#45 David.evans

David.evans

    4 warning points

  • Donator
  • 3,807 posts
  • Location:Birmingham

Posted 04 August 2017 - 05:40 am

What a great bunch of lads
I thought I might have got ribbed asking that !
Thanks
Atb


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users