Bisley Magnums

[si brown 8,486]

typical bank holiday weather in north-yorkshire..... cr@p and raining!!

by 2pm i was climbing the walls and id overdosed on junk tv.. so i thought sod it I'm off out!

went to the dairy farm cos there are ferrels and daytime rats to go at and i can shelter in the sheds

 

dropped a couple of ferrels and a few rats but it was slow.. i don't bother picking these up as i just boot them into the nearest puddle or out of sight

 

the weather sort of faired up so i set off for a walkabout, the fields change and rotate that quickly its hard to know wheres best to go when you

want to get on the rabbits.. so i left the farm and jumped over the fence into a maize field, all the shoots are coming through and by the state of them the rabbits are feasting well

ill freely admit i missed a few in the fist field cos it was wet through and i wasn't going to lay down in it.. then i hopped a fence into a silage field that was short the other week... its like a bloody jungle now and i got soaked walking through it!!

there were a few rabbits about but getting on them was a nightmare!

finally i got to a shortish grass field and i was that wet i didn't give a feck about laying down...

fist rabbit of the day at about 40yrd off the pod

the bisley mags are lethal in this fx

i was now feeling a bit more confident after two fields from hell... so i moved up to a nib that was probably an old gateway and got down and tucked in!

there were six rabbits in range so i managed to bag 3 in less than a minute.. the nearest was prob 30 and the farthest was just over 60!

watching the mags hit home is something else, you can see them dropping at the far ranges but they fly true.

the nib

this is where the farthest dropped,, thats the nib on the left near the tree

[si brown 8,486]

then i carried on to another maze field but it didn't go to plan.. the feeding woodys put the rabbits onto me

and the cows on the other side started going nuts

managed to get this startled one at about 30 freehand then called it a draw

and the final bag

 

not a bad day out for a perm that was obliterated by mixy last year!

 

atb si

[The one 8,396]

At least your out and got a few its been pissing down here all day

[Jonjon79 13,340]

Nice work Si

 

Those Bis Mags do seem to carry a lot of energy

[si brown 8,486]

Nice work Si

 

Those Bis Mags do seem to carry a lot of energy

cheers jon

yeah you didn't want to see the other side of the first one

these mags are the only heavy pellet that its accurate with but it certainly makes up for its fussiness

[Jonjon79 13,340]

 

 

Nice work Si

 

Those Bis Mags do seem to carry a lot of energy

cheers jon

yeah you didn't want to see the other side of the first one

these mags are the only heavy pellet that its accurate with but it certainly makes up for its fussiness

I bet mate - that was some placement and mark on that first one

 

..... that must have landed with one hell of a crack

 

Nice clean shot

[bigmac 97kt 13,732]

That looks like the field where that bird of pray nicked my rabbit SI lol

 

Watch them mags mind they do tend to be good for a while then for some strange reason they go off after a few weeks

 

Viz had the same bother with them to

 

Nice shooting by the way

 

Your getting better

 

atvbjimmy :thumbs:

[si brown 8,486]

 

 

 

Nice work Si

Those Bis Mags do seem to carry a lot of energy

cheers jon

yeah you didn't want to see the other side of the first one

these mags are the only heavy pellet that its accurate with but it certainly makes up for its fussiness

I bet mate - that was some placement and mark on that first one

..... that must have landed with one hell of a crack

Nice clean shot

Started a new tin today... think they may of altered there processing!

The new ones are super clean and look to of been cast differently

The old ones were good but not this good!

A full mag and picked the numbers off

 

[si brown 8,486]

That looks like the field where that bird of pray nicked my rabbit SI lol

 

Watch them mags mind they do tend to be good for a while then for some strange reason they go off after a few weeks

 

Viz had the same bother with them to

 

Nice shooting by the way

 

Your getting better

 

atvbjimmy :thumbs:

it was near there... your field was the jungle!

didn't see your bird but the hobby has come back

i couldn't of got any wetter me legs were soaked

your gonna have to get back down soon

atb si

[Jonjon79 13,340]

 

 

 

 

Nice work Si

Those Bis Mags do seem to carry a lot of energy

cheers jon

yeah you didn't want to see the other side of the first one

these mags are the only heavy pellet that its accurate with but it certainly makes up for its fussiness

I bet mate - that was some placement and mark on that first one

..... that must have landed with one hell of a crack

Nice clean shot

Started a new tin today... think they may of altered there processing!

The new ones are super clean and look to of been cast differently

The old ones were good but not this good!

A full mag and picked the numbers off

 

IMG_1520.JPG

You can't argue with that mate

 

 

Just an idea but, have you tried lubing them?

..... Not that there's anything wrong with what that combo did today.

 

I always used to say that pellet lube was bollocks and, I certainly don't wash and dry them but, I found a couple of drops of Napier Power Pellet lube in my dirty FTTs works wonders - for me, it tightened up the groups and gave a bit more velocity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

It also gave me a new feckin tag

[si brown 8,486]

 

 

 

 

Nice work Si

Those Bis Mags do seem to carry a lot of energy

cheers jon

yeah you didn't want to see the other side of the first one

these mags are the only heavy pellet that its accurate with but it certainly makes up for its fussiness

I bet mate - that was some placement and mark on that first one

..... that must have landed with one hell of a crack

Nice clean shot

Started a new tin today... think they may of altered there processing!

The new ones are super clean and look to of been cast differently

The old ones were good but not this good!

A full mag and picked the numbers off

 

IMG_1520.JPG

You can't argue with that mate

 

 

Just an idea but, have you tried lubing them?

..... Not that there's anything wrong with what that combo did today.

 

I always used to say that pellet lube was bollocks and, I certainly don't wash and dry them but, I found a couple of drops of Napier Power Pellet lube in my dirty FTTs works wonders - for me, it tightened up the groups and gave a bit more velocity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

It also gave me a new feckin tag

 

not sure how to answer this with moxy prowling about

but yeah I've been thinking about it, they don't all load as smoothly as id like and if they get gouged they start flying!

one mags ace with them the others sh!te

 

don't tell anyone

[Jonjon79 13,340]

 

 

 

 

 

 

Nice work Si

Those Bis Mags do seem to carry a lot of energy

cheers jon

yeah you didn't want to see the other side of the first one

these mags are the only heavy pellet that its accurate with but it certainly makes up for its fussiness

I bet mate - that was some placement and mark on that first one

..... that must have landed with one hell of a crack

Nice clean shot

Started a new tin today... think they may of altered there processing!

The new ones are super clean and look to of been cast differently

The old ones were good but not this good!

A full mag and picked the numbers off

 

IMG_1520.JPG

You can't argue with that mate

 

 

Just an idea but, have you tried lubing them?

..... Not that there's anything wrong with what that combo did today.

 

I always used to say that pellet lube was bollocks and, I certainly don't wash and dry them but, I found a couple of drops of Napier Power Pellet lube in my dirty FTTs works wonders - for me, it tightened up the groups and gave a bit more velocity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

It also gave me a new feckin tag

not sure how to answer this with moxy prowling about

but yeah I've been thinking about it, they don't all load as smoothly as id like and if they get gouged they start flying!

one mags ace with them the others sh!te

 

don't tell anyone

I haven't shown the missus that tag yet - I'm biding my time carefully for that one

 

 

...... I've just ordered a couple of bottles of that lube - I'll send you one up when up when they arrive

 

..... They made the pellets in my Superten cycle silky smooth

 

I just put a few drops in a tin and sit there turning and rotating it for a while.

[mark williams 7,549]

Nice shooting Si

[philpot 4,927]

I had considered lubing my pellets Jon but to be honest it seems a load of faff. Mark sprays silicone on his mag which seems to work for him but the thought of washing, drying and then lubing

 

 

Nice result Si by the way. It rained a little down here but I stayed in as I have buggered my neck (fcuk knows how) so somewhat painful.

 

One pellet to try Si is AA Field Heavy, wow what a pellet, I am very impressed with them.

 

Phil

Edited May 29, 2017 by philpot

[Jonjon79 13,340]

I had considered lubing my pellets Jon but to be honest it seems a load of faff. Mark sprays silicone on his mag which seems to work for him but the thought of washing, drying and then lubing

 

 

Nice result Si by the way. It rained a little down here but I stayed in as I have buggered my neck (fcuk knows how) so somewhat painful.

 

One pellet to try Si is AA Field Heavy, wow what a pellet, I am very impressed with them.

 

Phil

I spray my HW mag after Marks recommendation - it works for me

 

I don't wash and dry the pellets - that's way too much pissing about - I literally just put a few drops of lube in a tin and, sit there slowly rotating for a while.

 

It worked really well on .22 FTTs in my old Superten. They were pretty good anyway but, it made them cycle a lot smoother and, brought the grouping together better.

..... the pictures below are before and after

 

However, I have tried it with other rifles/pellets and it's done completely the opposite.