3175darren 1,093 Posted March 4, 2017 Report Share Posted March 4, 2017 Here it is can't find the make, but as said dedicated for bsa airguns with there awful mounting grooves, it is the only mount that seems to work on this gun and has held zero well for long periods of time, hope you can Seecheers greyman Quote Link to post
bigmac 97kt 13,732 Posted March 5, 2017 Author Report Share Posted March 5, 2017 Just put the first coat of oil on the stock the first coat all ways sinks into the stock and acts like a base coat so the rest of the oil sits on top so to speak , Not much to look at at the moment so no pics ill put another coat on tonight atvbjimmy :thumbs: Quote Link to post
bigmac 97kt 13,732 Posted March 5, 2017 Author Report Share Posted March 5, 2017 Just been to my mate,s John the rfd to get the action machine polished she is coming a long nicely now stripped the hole action and buffed it all up plus the piston got some new seals for her as well and a new washer for the piston and seal TOP FELLA AND A GOOD FRIEND,, SPORTS AND LEISURE AT BLYTH THANKS JOHN atvbjimmy :thumbs: 1 Quote Link to post
bigmac 97kt 13,732 Posted March 5, 2017 Author Report Share Posted March 5, 2017 AND IM LEAVING THIS SILVER ATVBJIMMY :thumbs: 3 Quote Link to post
Jonjon79 13,340 Posted March 5, 2017 Report Share Posted March 5, 2017 AND IM LEAVING THIS SILVER ATVBJIMMY :thumbs: Just that bit? Or the whole lot? 1 Quote Link to post
bigmac 97kt 13,732 Posted March 5, 2017 Author Report Share Posted March 5, 2017 AND IM LEAVING THIS SILVER ATVBJIMMY :thumbs: Just that bit? Or the whole lot? just THAT BIT JON SORRY MATE stock is looking mighty fine mind atvbjimmy :thumbs: 2 Quote Link to post
bigmac 97kt 13,732 Posted March 5, 2017 Author Report Share Posted March 5, 2017 And the way she did look :thumbs: Quote Link to post
mattwhite 1,993 Posted March 5, 2017 Report Share Posted March 5, 2017 Whoever ends up with this one is one lucky fella! 1 Quote Link to post
bigmac 97kt 13,732 Posted March 5, 2017 Author Report Share Posted March 5, 2017 just done the blueing on the action cleaned and polished the chamber out re,polished the piston again just got to do the spring ends and the top hat then she will be put back together again (the action) the stock needs a few more coats of oil first Matt i may just keep this one for my self bud would any one blame me if i did atvbjimmy :thumbs: 2 Quote Link to post
vizlauk 1,568 Posted March 5, 2017 Report Share Posted March 5, 2017 Keep hold of it for your efforts mate 2 Quote Link to post
mattwhite 1,993 Posted March 5, 2017 Report Share Posted March 5, 2017 I wouldn't blame you at all pal. I would very much like to see some pics of her out hunting in the field when she's finished too?? 1 Quote Link to post
bigmac 97kt 13,732 Posted March 5, 2017 Author Report Share Posted March 5, 2017 Just about done now lads im off shooting tonight i can do with the rest from these lol atvbjimmy :thumbs: 1 Quote Link to post
Rimfireboy! 1,463 Posted March 6, 2017 Report Share Posted March 6, 2017 Looking forward to seeing it finished, the last airsporter I had was the 'S' model. The ones I've had were pellet sensitive though, only worked well with eley wasps 5.6mm, the original ones. Wouldn't mind a mk1 or mk2 just for nostalgia value. Great thread, thanks for sharing. 1 Quote Link to post
Jonjon79 13,340 Posted March 6, 2017 Report Share Posted March 6, 2017 AND IM LEAVING THIS SILVER ATVBJIMMY :thumbs: Just that bit? Or the whole lot? just THAT BIT JON SORRY MATE stock is looking mighty fine mind atvbjimmy :thumbs: It's looking very good mate I've always liked the way the metalwork on those BSAs swoops down toward the grip - it's only simple but, a nice bit of styling Quote Link to post
David.evans 5,323 Posted March 6, 2017 Report Share Posted March 6, 2017 Your wasted hear Mac , with hands and skills like that you should work for NASSA ATB big fella Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.