Jump to content

Recommended Posts


I don't buy from dangkung but use the equivalent to1745, I really like it but the size of the loop you make at the forks makes a massive difference, a single strand on a pickle fork but a loop of one third band length on my normal catty shoots 10mm steels lovely, were as I have a full length double on another one and that fires 12mm leads with ferocious power but the hand slaps are equally ferocious, so I would say a loop of one third is my favourite all rounder, if you make the loop with a piece of tube slid over instead of tuck and wrap you can adjust the loop size with a bit of spit and a good yank until you find the length that suits you

Link to post
Share on other sites

What I'm using must not be dankung then lads as this you would never double up I don't think I've got theraband black here and it's a touch thinner but still got a good bit of power to it. I've just chucked it on a milbro I'll have a walk in abit see how it performs.

Link to post
Share on other sites

Just had a quick few shots whilst excersising the dogs imo a very good set of hunting tubes these I was shooting a can it was going clean through and barely making the can wobble I'm only using steels with leads I reckon it be deadly setup for any quarry gonna get the 12mm mould out when I have time knock some up cracking bands just gonna have to buy some more now.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...