Jump to content

Recommended Posts

I think I will try loading 50grn vmax and one other similar 50grn head... Load 5 of both types of bullet at minimum powder, then as I said, increase both heads by 0.2 of powder each time up to max load. Then pick the best group of each bullet... Then maybe very lightly crimp the two best loads (of each different bullet) and see if it improves either round... Then pick my overall winner and stick with it so long as I'm happy with the results...

 

Expect more questions and a good thread to read soon!!

Link to post

I think I will try loading 50grn vmax and one other similar 50grn head... Load 5 of both types of bullet at minimum powder, then as I said, increase both heads by 0.2 of powder each time up to max load. Then pick the best group of each bullet... Then maybe very lightly crimp the two best loads (of each different bullet) and see if it improves either round... Then pick my overall winner and stick with it so long as I'm happy with the results...

 

Expect more questions and a good thread to read soon!!

 

Sounds like you are on the right track mate. :thumbs:

 

Personally I would go up 0.5 grains at a time to begin with. If you want to tighten it up even more drop down to 0.2 grains at the next reload session, when you are closer to the best weight. Going up 0.2 to begin with will be quite a mammoth task if you work from the published starting weight to the maximum weight.

 

ATB

  • Like 1
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...