Jump to content
Sign in to follow this  
mickeyfn19

Night Vision Scope Camera?

Recommended Posts

all parts are here. camera alone with t20 sees just under 200 yards. with scope the range is decreased by quite a bit. any suggestions?

I hate to say it to you Mick but this video sums up my own findings about that camera, both were used with default settings:

 

 

I referred to the poor comparison in the video that follows on from it too.

 

I got a brighter image by altering the OSD settings but it then went jittery when panning across things because the frame rate was lengthened:

That's OK for spotting but not for shooting because the bunny could have moved during the lag time and the shot if you get what I mean.

 

I personally suspect the MC camera has a HAD sensor fraudulently described as an ExView sensor. If anyone has a damaged one it would be great if they could take the sensor off to see what is written on the back of it.

 

As a fall-back idea you could use the camera for a 'scopeless' rig because it has the ability to generate a crosshair, or a spotter.

Share this post


Link to post
Share on other sites

He wasn't on about your cam micky,sorry blues I've been a bit busy,the cmos board I have in the spotter came from this camera http://www.dhgate.com/product/mini-139-cmos-700tvl-16mm-board-security/157747477.html#s1-16-1|4139453168 although listed as a 1/3 I have my doubts,it could be a 1/4 sensor but works well all the same.

The seller is on ebay and will sell just the board no case or lens etc,although I can't recall his name on the bay but message him on dhgate if you want to know more etc.

 

Sorry to hear about the pitfalls in your camera micky,I got one from MC (link on this thread somewhere) and have no problems with it what so ever,although mine is a mini box cam rather than the tube type.

Edited by weebster

Share this post


Link to post
Share on other sites

 

He wasn't on about your cam micky,sorry blues I've been a bit busy,the cmos board I have in the spotter came from this camera http://www.dhgate.com/product/mini-139-cmos-700tvl-16mm-board-security/157747477.html#s1-16-1|4139453168 although listed as a 1/3 I have my doubts,it could be a 1/4 sensor but works well all the same.

The seller is on ebay and will sell just the board no case or lens etc,although I can't recall his name on the bay but message him on dhgate if you want to know more etc.

 

Sorry to hear about the pitfalls in your camera micky,I got one from MC (link on this thread somewhere) and have no problems with it what so ever,although mine is a mini box cam rather than the tube type.

 

Interestingly I also now have one of those box cams that initially seems comparable to the E700 - the jury is still out though.

 

Seems a woman runs MC and her husband runs another site selling the same stuff.

Share this post


Link to post
Share on other sites

 

 

He wasn't on about your cam micky,sorry blues I've been a bit busy,the cmos board I have in the spotter came from this camera http://www.dhgate.com/product/mini-139-cmos-700tvl-16mm-board-security/157747477.html#s1-16-1|4139453168 although listed as a 1/3 I have my doubts,it could be a 1/4 sensor but works well all the same.

The seller is on ebay and will sell just the board no case or lens etc,although I can't recall his name on the bay but message him on dhgate if you want to know more etc.

 

Sorry to hear about the pitfalls in your camera micky,I got one from MC (link on this thread somewhere) and have no problems with it what so ever,although mine is a mini box cam rather than the tube type.

 

Interestingly I also now have one of those box cams that initially seems comparable to the E700 - the jury is still out though.

 

Seems a woman runs MC and her husband runs another site selling the same stuff.

 

 

 

 

He wasn't on about your cam micky,sorry blues I've been a bit busy,the cmos board I have in the spotter came from this camera http://www.dhgate.com/product/mini-139-cmos-700tvl-16mm-board-security/157747477.html#s1-16-1|4139453168 although listed as a 1/3 I have my doubts,it could be a 1/4 sensor but works well all the same.

The seller is on ebay and will sell just the board no case or lens etc,although I can't recall his name on the bay but message him on dhgate if you want to know more etc.

 

Sorry to hear about the pitfalls in your camera micky,I got one from MC (link on this thread somewhere) and have no problems with it what so ever,although mine is a mini box cam rather than the tube type.

 

Interestingly I also now have one of those box cams that initially seems comparable to the E700 - the jury is still out though.

 

 

As far as I know the only thread I have seen that compares that small box camera was against the watec 902h and from memory it done it alright,I doubt it's better than the e700 BUT it is easier to mount in another box and there's a choice of c/cs mount or mtv 12mm mount lenses.

It has an osd button on the back of the board rather than the lead so again similar to the e700,privacy settings although all I've done with mine is remove the ir filter and set to b/w.

Oh and it's £35 ish so half the cost of the e700,for airgun use it's ideal and I'd say well out 100yds+ for those with powder burners :laugh:

Edited by weebster

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×