Mossberg12 102 Posted June 7, 2013 Report Share Posted June 7, 2013 i charged my bsa ultra multishot last night with a stirrup pump and forgot to release the pressure via the valve on the pump.upon release there was a loudish pop.i then put 20 shots through it to sight it up with no problems.i then tried to top up the rifle but the seal on the rifle/addaptor was leaking air? any ideas to solving the problem? regards mossberg Quote Link to post
moxy 617 Posted June 7, 2013 Report Share Posted June 7, 2013 Sounds like you have blown a seal. Should be a simple and cheap fix if you can get in to replace the o ring. Quote Link to post
Mossberg12 102 Posted June 7, 2013 Author Report Share Posted June 7, 2013 wasnt sure of seal on the gun or pump? will take both in to the gunshop tomorrow to sort out. thanks Quote Link to post
moxy 617 Posted June 7, 2013 Report Share Posted June 7, 2013 Has your gun dumped all the air?? Is it empty? Quote Link to post
Mossberg12 102 Posted June 7, 2013 Author Report Share Posted June 7, 2013 no,still shoots fine. Quote Link to post
moxy 617 Posted June 7, 2013 Report Share Posted June 7, 2013 Then it's your pump. Quote Link to post
Buster321c 1,010 Posted June 7, 2013 Report Share Posted June 7, 2013 Or maybe the seal on the charging probe . Do they have 2 on BSa`s ? 1 Quote Link to post
Mossberg12 102 Posted June 7, 2013 Author Report Share Posted June 7, 2013 yes,theres 2 seals on the adapter. Quote Link to post
moxy 617 Posted June 7, 2013 Report Share Posted June 7, 2013 Or maybe the seal on the charging probe . Do they have 2 on BSa`s ? Cheers daddy. That's what I was getting at. Mossberg. Check those 2 o rings. One will have possibly blown. Remember to re lube your rubber when you replace. Quote Link to post
Mossberg12 102 Posted June 7, 2013 Author Report Share Posted June 7, 2013 will do.thanks for the help. Quote Link to post
Lewis Ste 245 Posted June 8, 2013 Report Share Posted June 8, 2013 I did it once or twice when I had my ultra, try are a piece of piss to take the air cylinder of is you need to by tere shoul be 2 o ring on the filler probe check them but if you need any info give xnx a ring or check his YouTube page it's very useful 2 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.