Jump to content

Recommended Posts

i would like to have an honest opinion of these doublers from people who have actually used them ,both good and bad as i was thinking of getting one.what has made me a bit sceptical is i have had an e mail off someone who used one and he said it was good for rimfire and airgun.but when he used it on his 223 he had problems with poi change and did not know if doubler was moving under recoil or if it was parrallax problems.i was planning on using it mainly for hmr .thanks for looking.

Link to post
Share on other sites

Hi dogv ,,, I have a doubler that I use on both a 17 and 223 . I do not have a problem with POI on either gun However , there is a POI difference when the doubler is installed . I made a removable mount for the doubler after reading various posts about the doubler coming loose . The difference in clarity after the installation is quite remarkable . Hope this info is of help to you .

 

ATB George

Link to post
Share on other sites

thanks for your reply .so what you are saying is if you zero a gun in without the doubler fitted and you decide to fit one later , it will mean that the gun is going to need to be re-zeroed to cater for the poi change . what sort of poi do you get l -r u-d or both.do you have a picture of your removeable mount that you could possibly send me..thanks and all the best

Edited by dogvixen01
Link to post
Share on other sites

The stalker is dead on as long as you keep the doubler on you will have no POI changes . I will be glad to send you some pics if you want . Can I post them here or by email ?

 

 

George

Hi George ,could you post the pics on here so that everyone can see for future reference cheers :thumbs:
Link to post
Share on other sites

The stalker is dead on as long as you keep the doubler on you will have no POI changes . I will be glad to send you some pics if you want . Can I post them here or by email ?

 

 

George

Hi George ,could you post the pics on here so that everyone can see for future reference cheers :thumbs:

 

Here is a completed shot on a barreled action ,, Will post smaller photos of the various components later if neededpost-66075-0-30275600-1327248257.jpg

Link to post
Share on other sites

Stuhlschuter...... That's neat n tidy!

 

The problem of the adaptors moving on recoil was raised on another forum some months ago and a lot of people found it difficult to judge the right amount of pressure to the mounting screws to prevent movement.

 

Some of them overcame it by gluing the adaptor in place on the 'scope!! If you use silicone seal at least you can get it off if needs be.

 

atb

FBW

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...