Feckin sound moderator

[RaiderBoy 19]

Thats definitely clipping, what I'd do is either take the mod to a gunsmith to get the washers re-aligned, or drill the centres of the washers bigger to avoid the clipping, or buy a new mod

 

a new mod is on the list for christmas what you think of these http://www.inov8design.co.uk/section2.asp?sid=3&id=139

 

RIchard

[ASME IX 1]

try zeroing the rifle with out the moderator fitted see if you get better groups.also put a streight edge or steel rule along the barrell to see if there are any bends init,

 

asme9

[maty j 6]

You shouldn't need a rod to assemble the silencer. The baffles should be a tight fit against the inside of the tube thus eliminating any chance of them being thrown into the line of fire.

 

That other silencer looks too high tec for me, probably expensive too being ceramic. Also with It being ceramic It wouldn't last me long. In my line of work I deal with ceramic alot and the amount of times I've smashed or cracked It Is unreal

 

Have you tried the silencer again after singeing all the strands off? Any luck with better accuracy?

[RaiderBoy 19]

You shouldn't need a rod to assemble the silencer. The baffles should be a tight fit against the inside of the tube thus eliminating any chance of them being thrown into the line of fire.

 

That other silencer looks too high tec for me, probably expensive too being ceramic. Also with It being ceramic It wouldn't last me long. In my line of work I deal with ceramic alot and the amount of times I've smashed or cracked It Is unreal

 

Have you tried the silencer again after singeing all the strands off? Any luck with better accuracy?

 

yeah im going to have a go now

 

Richard

[bunny killer 19]

You shouldn't need a rod to assemble the silencer. The baffles should be a tight fit against the inside of the tube thus eliminating any chance of them being thrown into the line of fire.

 

That other silencer looks too high tec for me, probably expensive too being ceramic. Also with It being ceramic It wouldn't last me long. In my line of work I deal with ceramic alot and the amount of times I've smashed or cracked It Is unreal

 

Have you tried the silencer again after singeing all the strands off? Any luck with better accuracy?

 

yeah im going to have a go now

 

Richard

hi mate if you want to bring the gun down to neath,i will take the weirach silencer of my airwolf for you to try,,all the best

[RaiderBoy 19]

You shouldn't need a rod to assemble the silencer. The baffles should be a tight fit against the inside of the tube thus eliminating any chance of them being thrown into the line of fire.

 

That other silencer looks too high tec for me, probably expensive too being ceramic. Also with It being ceramic It wouldn't last me long. In my line of work I deal with ceramic alot and the amount of times I've smashed or cracked It Is unreal

 

Have you tried the silencer again after singeing all the strands off? Any luck with better accuracy?

 

yeah im going to have a go now

 

Richard

hi mate if you want to bring the gun down to neath,i will take the weirach silencer of my airwolf for you to try,,all the best

 

no luck as yet still throwing the pellets about im going to put the original air stripper back into were the silencer adaptor goes to see if it makes a difference

 

Richard

[Phantom 631]

Richard,

 

Have you changed pellets lately?

And another obviouse one really, is your barrel clean?

 

I ask because if its chucking pellets all over without the silencer there is something deffinately wrong with the rifle or scope. You've not banged the scope have you?

 

Phantom

[RaiderBoy 19]

Richard,

 

Have you changed pellets lately?

And another obviouse one really, is your barrel clean?

 

I ask because if its chucking pellets all over without the silencer there is something deffinately wrong with the rifle or scope. You've not banged the scope have you?

 

Phantom

 

i have had a change of pellets from accupels to napier target pellets and i have gotten through half a tin before this started happening. now without the silencer and adaptor i am gettind 5p groups but with the silencer and adaptor its throwing pellets up to a foot of target and i recently had the barrel and scope alinged because the barrel was loose and its now tight.

 

Richard

[Guest Scuba1]

Ok

 

Strip the silencer and clean the washers. Use a paint pen or a red or blue marker pen and "paint " the inside of the drilled holes of the moderator. Put the thing back together and fire a few shots through it. Now you can strip it again ad if they are clipping the washer and I think they are the paint will be gone in those spots. Use a little round file do enlarge the holes a bit where the paint is AWOL and start the whole process again. Its a bit of a PITA but piles are worse.

 

HTH

 

Michael

[Guest buster321c]

Get ya down to B&Q and buy a handfull of washers the same size , with larger diameter holes in the center . Swap them over for the ones in the mod and see what happens . To be honest if you tried without the mod on and it was ok , then there`s only one answer isn`t there .

[RaiderBoy 19]

yeah its got to be clipping im gonna try scubas idea when i get a chance

 

Richard