Webley xocet Cal22

[bagem 2]

Hi Everyone.

Just joined need a bit of advice I have been given a webley xocet cal22 apparently only fired about a dozen times like brand new, i want it for myself and 2 boys to do abit of hunting .

How can i bring this rifle to be something to be reckoned with in terms of scope/silencer ect any advice would be greatly appreciated biggrin.gif THANKS

 

 

Told to put this post here

[foxon 0]

Hi Everyone.

Just joined need a bit of advice I have been given a webley xocet cal22 apparently only fired about a dozen times like brand new, i want it for myself and 2 boys to do abit of hunting .

How can i bring this rifle to be something to be reckoned with in terms of scope/silencer ect any advice would be greatly appreciated biggrin.gif THANKS

 

 

Told to put this post here

Go to your local RFD, ask to look at Hawke or 3x9x40 scope & mounts, silencer will not make any difference on this as the action is louder than the muzzle raport, look for a care kit with cloths silicone oils etc, look for pellets that fit your rifle in the breech as they have a tight choke on the xocet, I would take your rifle in with you so you can test pellets in breech if they permit.

Atb foxon.

[stealthy1 3,964]

Good advise Foxon

[andyfr1968 772]

Hi, mate.

 

The Xocet's a really nice basic springer.

 

As Foxon's said, the mechanical noise on them can be quite bad (not as bad as a Lightning though), I fitted a gas-ram to mine and it's made a hell of a change to the gun! Much quieter, no more rattles and twangs and no need to worry about leaving it cocked for too long.

 

Have a look at the JSR range of scopes as well. Top value and a good firm to deal with.

 

Cheers.

[bagem 2]

Hi, mate.

 

The Xocet's a really nice basic springer.

 

As Foxon's said, the mechanical noise on them can be quite bad (not as bad as a Lightning though), I fitted a gas-ram to mine and it's made a hell of a change to the gun! Much quieter, no more rattles and twangs and no need to worry about leaving it cocked for too long.

 

Have a look at the JSR range of scopes as well. Top value and a good firm to deal with.

 

Cheers.

 

 

Thank you all for your advice, where would i go to get a gas ram fitted and about how much are we talking would it reduce power Thanks

[foxon 0]

Hi, mate.

 

The Xocet's a really nice basic springer.

 

As Foxon's said, the mechanical noise on them can be quite bad (not as bad as a Lightning though), I fitted a gas-ram to mine and it's made a hell of a change to the gun! Much quieter, no more rattles and twangs and no need to worry about leaving it cocked for too long.

 

Have a look at the JSR range of scopes as well. Top value and a good firm to deal with.

 

Cheers.

 

 

Thank you all for your advice, where would i go to get a gas ram fitted and about how much are we talking would it reduce power Thanks

Donnyc will be your man for the Gas Ram, he is on THL & you will not find it cheaper. The Gas Ram will improve the rifle in many ways, it will be a lot quieter with a smoother action, half the recoil of the springer & a cleaner trigger pull, if you do go the Gas Ram route it would be worth while fitting a sound moderator.

Atb, foxon

[andyfr1968 772]

Hi, mate.

 

The Xocet's a really nice basic springer.

 

As Foxon's said, the mechanical noise on them can be quite bad (not as bad as a Lightning though), I fitted a gas-ram to mine and it's made a hell of a change to the gun! Much quieter, no more rattles and twangs and no need to worry about leaving it cocked for too long.

 

Have a look at the JSR range of scopes as well. Top value and a good firm to deal with.

 

Cheers.

 

 

Thank you all for your advice, where would i go to get a gas ram fitted and about how much are we talking would it reduce power Thanks

Donnyc will be your man for the Gas Ram, he is on THL & you will not find it cheaper. The Gas Ram will improve the rifle in many ways, it will be a lot quieter with a smoother action, half the recoil of the springer & a cleaner trigger pull, if you do go the Gas Ram route it would be worth while fitting a sound moderator.

Atb, foxon

 

 

Yup!

 

Donny's a straight bloke to deal with. I've had three kits from him and no problems.

 

Cheers.