-Lupo-

Whats with the Stoeger X20 Supressor in .22? Cheap, powerful and reliable. Just needs better scope.

Sry gor the question, but what is included in a stage 2 kit?

Really. Many marksmen do it with their rifles. There is a special ammunition with grinding function for that. Its called "fire lapping". There was a thread in our forum, so i tried it. And i compared the results, i was impressed. The group was smaller and it is still. I have about 3000 shots since then. Believe it or not.

The Stoegers have problems with the poston seal after a while. The original one is not the best. I recommend to put in a seal of the Gamo 440 Series or one of the Tell (Cometa) Fusion/400. Best seal for the Stoeger, i use this seal in my own X20S and it has got a little more power just because of this seal.

Just buy a V-Mach Kit and put it in. Polish the trigger where the piston hooks in. And also the part of the piston, where it hooks in the trigger. Then you fire about 60 shots of pellets, which are full of polish paste. Then fire 10 normal shots and clean the barrel. Now you barrel is "fitted" for your pellets. After 30-40 shots you'll have really nice groups if you compare it with the groups before.

Hey. I also own a X20S in .22 Full tuned with a Welsh Willy Kit, and a trigger tune made by my self. Also it got a "barrel lapping". Now this rifle is incredible accurate with 14.33 grain Hämmerli Field Target Performance pellets. In a german forum I'm a well known expert for chinese rifles. If you need advice for your trigger, let me know. It's easier than you might think.

Hi Vasil, nice Forum! Hope you enjoy this forum too ) Greetings from Germany

Its not sure, that a break barrel have less accuracy than a fixed barrel. It depends on the situation. A 40 year old HW 35 has not so much accuracy than a new one. It depends on the care of it. I change the small brass washers at the barrel screw on all my breakers every two years or so. If i shoot it much. So i have always a good closing of the barrel. My HW 35 Export is accurate as hell. For field Target i use the 97 K Black line. So, there u don´t have anything to do with this breaker problems. Its your chioce, but the is one of the strongest rifles here in Germany. Hope i

What I know, the Trigger Guard from the HWs isn´t blued. Its not made of steel. This is some kind of coating. Just spray it with filler, and then with black coat. It´s exactly that, what the guys in Mellrichstadt (HW Factory) do.

thanks again folks. @Bullshot: Wismar is about 500km away from me (Nürnberg). Toooo far. but if anybody of you guys visit Nürnberg/Bavaria, he should be my guest Cheers

so here is my HW 97 used for Field Target (.177, V-Mach, Trigger tune) And this is one of the nicest HW 35 you have ever seen ;-) This is a HW35 Export, mod. of 2012, 470mm barrel, .177 caliber I customized the stock, now its lighter in front, the wood is oiled walnut. Trigger is also customized and polished everywhere, a compensator of the HW 100 is also mounted. I mounted a 3-9x40 Scope, cause i use this rifle only at 15meters. No hunting with it. Sling is handmade by a personal friend of mine. (If someone would like this sling, contact me) Gr

Hey mate. I'm using the H&N Field Target Trophy. They have 14,33 Grain (0,95g) and are very accurate. I use them in a Hi-Power Stoeger X20.

Hey mate. I'm using the H&N Field Target Trophy. They have 14,33 Grain (0,95g) and are very accurate. I use them in a Hi-Power Stoeger X20.

Yes mate, i agree. Simple thing: The Springs from Weihrauch are not taht good, you have to change it. I´ve installed a V-Mach spring, piston seal, and sheet in the piston. Also i did a barrel honing. Shoots really nice groups. In the future, my baby gets a full TTI Tune kit, with compression chamber and piston, which are both teflon beared. But you can have a lot of fun with that rifle out of the box.

Wild und Hund don´t means "The wild hunt" Wild means the animal (Deer, bunny, etc.) and Hund means Dog. Hope, I helped.